UAE +971 2 5557351 +971 4 3352995 +971 4 8831401 OMAN +968 24 750205 QATAR +974 44150543
37 x 23 x 20
46.60006
6C Angled Faceplate Adapter
Zeta6A Module Termination Tool 46.60011 200 x 180 x 35
Designed to accept the Zeta6A Module as well as other keystone products, the faceplate adapters:
• Moulded from V0 rated material
• Compatible with Pressac Eurostyle or 6C faceplates
• Angled to reduce backbox depth and reduce patchcord
snagging
• Slide in labelling feature.
• 6C adaptors designed for fl oor box use
The Zeta6A module termination tool is required to successfully and reliably fi nally terminate the cable to the module. Once the stuffer cap is dressed with the 4 pairs of wires, the Zeta6A module and stuffer cap are inserted into the tool. One press of the trigger trims off any excess cable off all 8 wires and reliably pus
46.60043
Ivory
116
R7298
46.60220.GY
46.60230.GY
46.60250.GY
2m Cat6A STP patch cord
3m Cat6A STP patch cord
5m Cat6A STP patch cord
Zeta6A 2 x 4P LSOH y
Pressac Zeta6A patchcords have been independently tested by a third party test house as fully component compliant to the Category 6A requirements of ANSI/TIA/EIA-568-C-2. Produced from individually pair screened stranded cable, they provide exceptional performance and help confirm standards compliance within the channel. Primarily available in grey in 1m, 2m, 3m and 5m lengths, other lengths and colours are available on request. (subject to min order quantities)
Features & Benefits:
• Screened stranded Cat6A cable used
• Standard colour grey, other colours available on request
• 1m, 2m, 3m and 5m standard lengths
• Booted plug protects latch from snagging
• Individually tested and packaged
Zeta6A Cable
Pressac Communication are proud to recommend Acome
as their primary supplier of Cat6A cable. After extensive testing, it was found that the Acolan 550SF-S range of individual pair screened cables provide the best overall performance of return loss, attenuation, crosstalk and alien crosstalk performance.
The Zeta6A Module is the fundamental building block of the Zeta6A system. Designed for use both in the patch panel and work area outlet, it’s designed to terminate the individually screened pair Zeta6A cable easily and reliably.
Features Include:
• Independently verifi ed as component compliant
• Stuffer cap terminates wires by IDC
• 568A or B wiring schedule
• Module is screened to provide good EMC and Alien
crosstalk performance
25 Year System Warranty
The Zeta6A Year System Warranty warrants that a Zeta6A structured cabling system, when installed by a Pressac Registered Installer in accordance with the ratified industry standards, will support any ratified networking protocol specified for use over a Class E cabling. In the event of a failure in
the system which can be identifi ed as a functional defect in any of the components or cable, Pressac Communications will guarantee to either fund the replacement or repair the defective part(
• Modular ‘Keystone’ style solution
• Screened solution for superior Alien crosstalk performance
• 24 way 1U Patchpanel
• Euro and 6C style adaptors available
• EIA/TIA and ISO component compliant
• Independently verifi ed by Delta
• 25 year Performance Warranty
Cat6A System
Overview
The Zeta6A system is a class leading Cat6A solution designed to be fully compliant with the recently ratifi ed EIA/TIA and ISO standards for Class E solutions.
To ensure the best possible performance against alien crosstalk over a 100m channel, Zeta6A is screened cable solution, that utilises a screened ‘keystone’ type module for termination at the outlet and patch panel.
All the key parts within the channel, (module, cable and patchcord) are independently verifi ed as been component compliant by Delta Electronics in Denmark.
Zeta6A Performance
The Zeta6A System has been independently tested by Delta Electronics Denmark and uses components that have been verifi ed as component compliant to the latest industry standards.
These include:
• ANSI/TIA/EIA-568-C.2
• ISO/IEC 11801 amendment 2 : 2010, Category 6A
• EN 50173 : 2007
Zeta6A 24 Way Keystone Panel
The Pressac 1U 24 way Keystone panel is designed to accept the Cat6A keystone module. Primarily for mounting in 19 inch cabinets, it complements the existing range of Pressac Cat5e and Cat6 patch panels. Manufactured from quality steel and powder coated in black, it is supplied with an earthing and fixing kit as standard. (must be fitted)
Features & Benefits
• Standard 19 inch practice - 24 Ports in 1U
• Removable ‘Arrow’ style cable management
bar
• Convex removable window labels
• Accepts industry standard ‘Keystone’
module
• Fixings and cable ties included
• Requires earthing kit for shield connection
(supplied)
The 50 way voice patch panel provides terminations for 50 voice
ports in an industry standard 19inch 1U format. Each port has the provision for 3 pairs to be wired using industry standard LSA/110 compatible connectors.
Pinout
RJ45 IDC
1 1
2 2
3 3
4 4
5 5
6 6
7 -
8 -
Cable management bars provide convenient cable management rings for tidy dressing and routing of patching cord.
• Available in 1U and 2U variants
• Manufactured in powder coated
mild steel
• Supplied with fi xing kit
44 x 482 x 120
2U Management bar D60.10372.PS0XX
Accepts 16 Eurostyle modules for 19
inch practice.
2U Management bar
50 x 25 x 20
50 x 25 x 20
50 x 25 x 20
D60.10593
D60.10594
D60.10595
50 x 25 x 20
50 x 25 x 20
52 x 22 x 44
52 x 22 x 44
52 x 22 x 44
K60.10495
K60.10497
D60.10488
D60.10487
D60.10489
Corded PBX Master
Corded Secondary
Fixed PSTN Master
Fixed PBX Master
Fixed Secondary
Plugging directly into an RJ45 socket, converting it to a standard BT voice outlet, Pressac line adapters can be corded or fi xed and are available in either PSTN Master, PBX Master or Secondary versions.
Manufactured in V0 rated material, the fi xed line adapters lock into place so as not to be accidentally removed. Corded adapters have a 170mm fl ying lead between the RJ45 plug and housing.
PSTN Master
PBX Master
Secondary
The Eurostyle RJ11 module is compatible with the Eurostyle face plates. Manufactured in V0 rated material with a white high gloss fi nish, the RJ11 module has a fully shuttered front aperture and an external white adhesive identifi cation label. Termination is via a 3 way 238A IDC connectors.
The Pressac range of Eurostyle BT outlets are compatible with the Eurostyle face plate range. Available as Master, PBX Master or Secondary each features 238A IDC connectors and external labeling features. Manufactured in V0 rated material, they have a white high gloss fi nish.
Cat5e and Cat6 Patch Panels
Presslink Cat5e and Zeta6 patch panels are
available in industry standard sizes and are rich'with installer friendly features. Low and high density versions are available with comprehensive labelling features. They are ideally suited for quick and reliable installation.
• Manufactured in powder coated mild steel
• IDC’s are compatible with either a LSA or 110
punch down tool
• Features ‘arrow’ style cable tie point for rear
cable entry
• Individual and bulk tie points for side cable entry
• Fitted with individual 568B (258A) colour coded
label for easy wiring
• Flip down front clear lens provides easy port
labelling and identifi cation
• Independently verifi ed to TIA/EIA-568-B.2-1
• Supplied with captive nuts and cable ties
The FTP ‘Shielded’ Cat5e patch panels have all
the features of the UTP equivalents yet provide exceptional performance against common mode
noise and alien interference. The panels are
supplied with individual earth grounding for each
FTP cable as well as an earth grounding kit for the
panel assembly.
D60.10701.01XX
D60.10701.02XX
D60.10701.03XX
D60.10701.05XX
D60.20701.01GY
D60.20701.02GY
D60.20701.03GY
D60.20701.05GY
46.10205.XX
46.10210.XX
46.10220.XX
46.10230.XX
46.10250.XX
1m Cat5e UTP patch cord
2m Cat5e UTP patch cord
3m Cat5e UTP patch cord
5m Cat5e UTP patch cord
1mtr Cat5e FTP patch cord
2mtr Cat5e FTP patch cord
3mtr Cat5e FTP patch cord
5mtr Cat5e FTP patch cord
0.5m Cat6 UTP patch cord
1m Cat6 UTP patch cord
2m Cat6 UTP patch cord
3m Cat6 UTP patch cord
5m Cat6 UTP patch cord
1U 483 x 88 x 44
2U 483 x 88 x 86
2U 483 x 88 x 86
1U 483 x 88 x 44
2U 483 x 88 x 86
D60.10691.PSOXX
D60.10690.PSOXX
D60.10692.PSOXX
D60.20691.PS0XX
D60.20692.PS0XX
1U 483 x 88 x 44
2U 483 x 88 x 86
2U 483 x 88 x 86
46.10024.C
46.10032.C
46.10048.C
24 Way Cat6 UTP Patch Panel
32 Way Cat6 UTP Patch Panel
48 Way Cat6 UTP Patch Panel
24 Way Cat5e UTP Patch Panel
32 Way Cat5e UTP Patch Panel
48 Way Cat5e UTP Patch Panel
24 Way Cat5e FTP Patch Panel
48 Way Cat5e FTP Patch Panel
Pressac offer UTP / FTP Cat5e and UTP Cat6 patchcords in a range of standard lengths and colours. Pressac patchcords are:
• Tested to meet ANSI/TIA/EIA 568B.2-1
• Booted to protect the latch from snagging
• Constructed using stranded cable
46.10042 5kg/100 mtr
BU - Blue, GN - Green, RD - Red, YW - Yellow, GY - Grey.
5kg/100 mtr
4pr UTP, Cat6 LS0H Purple 305 mtr Reelex Box
Zeta 6 solid UTP cable is constructed with a cross talk reducing spline for improved pair separation. With a typical outside diameter of 6.5mm, the cable is metre marked to aid installation.
P67.10122.XXXLZ
P67.10115.XXXPV
P67.10115.XXXLZ
4kg/100 mtr
4kg/100 mtr
4kg/100 mtr
4pr UTP, Cat5e LS0H Purple 305 mtr Reelex Box
4pr FTP, Cat5e PVC Grey 305 mtr Reelex Box
4pr FTP, Cat5e LS0H Purple 305 mtr Reelex Box
The Presslink Plus 125 MHz range of cables are designed to enhance Cat5e Permanent and Channel link performance. Well defined Power Sum of NExT,
FExT and Delay Skew performance up to 125 MHz, is far in excess of the required standard
Eurostyle Cat5e UTP RJ45 Module
Finished in white high gloss, the Eurostyle RJ45 module is available with a fully shuttered front aperture, and are designed to fi t in to the Eurostyle range of face plates. The RJ45 module comes complete with external white adhesive identification and internal 568B wiring schedule labels. Designed with a class leading low profi le it is also provided with a cable tie feature.
Eurostyle Cat5E UTP RJ45 Angled Module
The Angled Eurostyle Cat5e module is designed to snap into the eurostyle range of faceplates. Entry to the jack is angled downward to reduce the chance of cord snagging or accidental removal.
6C Cat5e UTP RJ45 Module
Made from V0 rated material and fi nished in white high gloss, the
6C RJ45 modules are available with a fully shuttered front aperture, and are designed to fi t in to the 6C range of faceplates or industry standard fl oor boxes. The RJ45 module comes complete with external white adhesive identifi cation and internal 568B wiring schedule labels. The IDC connectors will accept either LSA or 110 punch down tool.
Cat5E FTP RJ45 Modules
The Eurostyle and 6C range of FTP modules offer exceptional electrical interference immunity. They are compatible with the Eurostyle and 6C range of faceplates. Connection of the FTP drain wire is via an additional IDC contact.
85 x 85 x 10 (aperture 50 x 50)
85 x 147 x 10 (aperture 100 x 20)
86 x 86 x 18 (aperture 50 x 50)
85 x 147 x 18 (aperture 100 x 50)
50 x 12.5
50 x 25
50 x 50
D60.10318
D60.10319
46.00074
46.00075
D62.10138
D62.10106
D62.10139
K60.10674.PS9XX 37 x 23 x 19
D60.10906.PS9XX 50 x 25 x 30
D60.20674.PS9XX 39 x 25 x 35
D60.20684.PS9XX 50 x 25 x 35
37 x 23 x 19
50 x 25 x 30
39 x 25 x 35
50 x 25 x 35
Zeta 6 modules are uniquely styled with oval label lens and oval latch guide, they are easy to install and offer increased styling over more traditional outlets.
• Manufactured in high gloss V0 rated material
• IDC connections are compatible with LSA or 110 punch down
tools
• Side cable entry with ‘wraparound’ cable restraint providing strain relief
• Individual 568B (258A) colour coded wiring label fitted for easy
wiring.
• Removable oval clear lens for easy port labelling and identification
6C Cat5e UTP RJ45 Module
Eurostyle Cat5e UTP Angled Module
6C Cat5e FTP RJ45 Module
Euro Cat5e FTP RJ45 Module
85 x 85 x 10 (2 apertures 25 x 38.5)
85 x 147 x 10 (4 apertures 25 x 38.5)
25 x 38.5
The Pressac range of 32 mm deep back boxes are surface mountable and accept the full range of Eurostyle and 6C face plates. They are suitable for applications where an extra amount of space is required in the back box to accommodate cables and satisfy the minimum bend radius requirements of cabling installations.
46.10079.C
50 x 25 x 35tact
Euro Cat6 UTP RJ45 Module
86 x 147 x 32
46.00066 86 x 147 x 32
Double gang 32 mm deep
D60.10354
D60.10355
D62.10190
6C Double
6C Quadruple
6C Blanking Plate
Designed to take the Pressac 6C range of snap in modules, the 6C range of face plates and blanking plates are made from V0 rated material with a high white gloss finish. Each face plate is supplied with 2 fixing screws for convenient installation.
Euro Double
Euro Quadruple
Euro Double Bevelled
Euro Quadruple Bevelled
Euro Half Blank
Euro Single Blank
Euro Double Blank
The Eurostyle face plates are available with either single, double or quadruple apertures and are designed to take the full range of Eurostyle snap in adapters. These are complemented with the Eurostyle blanking plates, available in either half, single or double. Faceplates and blanking plates are made from V0 rated material with a white high gloss fi nish.
All face plates are supplied with fi xing screws for easy installation. With an increased depth of mounting, the bevelled faceplates effectively reduce the profi le of an installed module by 8 mm.
Performance
Independent Verification
All the major components within
the Presslink and Zeta6 ranges
have been independently tested by
Delta Electronics (Denmark) or BSI
(England) to prove their compliance
with the appropriate European,
American and International standards.
In addition, we have also had
worst case Permanent Link and
Channel measurements performed
on typical system installations to
further guarantee reliable system
performance for the system installed.
• 100 ohm UTP and FTP (Presslink 5e) variants
• Modular design
• Eurostyle and 6C face plate offering
• 19 inch 16, 24, 32 and 48 way patch panels
• High performance cables
• 25 year standards based performance warranty
• LSA or 110 punch down compatible terminations
• Independently verifi ed to ANSI/TIA/EIA-568-B.2-1
• Pressac Registered Installer (PRI) program
25 Year System Warranty
The 25 Year System Warranty warrants that a Presslink 5e or Zeta 6 structured cabling system, when installed by a Pressac Registered Installer in accordance with the ratified industry standards, will support any ratified networking protocol specified for use over the appropriate Category / Class of cabling. In the event of a failure in the system which can be identifi ed as a functional defect in any of the components or cable,
Pressac Communications will guarantee to either fund the replacement or repair the defective part(s) of the system at no cost to the customer. This warranty is in addition to the normal 25 year product warranty
Warranty
Pressac Communications have designed and manufactured quality telecommunications connectivity equipment for over 20 years. To ensure our customers meet their customers future needs, we offer the following guarantees for Pressac structured cabling systems.
25 Year Product Warranty
The 25 Year Product Warranty guarantees all connectivity and cable products supplied under the Presslink and Zeta brands and used in a Pressac structured cabling system.
Pressac guarantee to repair or replace any product which is shown to be defective in material or workmanship for a 25 year period from the date of installation, provided it has been installed by a competent installer in accordance with industry standards.
Presslink 5e Category 5e System
Presslink 5e is well established, cost effective, Category 5e Structured Cabling Solution. Designed with the installer in mind, it has been installed in many different countries with over 1 million outlets now installed, all with piece of mind of a 25 year systems performance warranty.
Zeta 6 Category 6 Solution
Zeta 6 is an independently tested, component compliant offering that is designed and manufactured in the UK. Offering true Category 6 / Class E performance, it is backwards compatible with Presslink 5e sharing many of it’s installer rich features
Structured Cabling Systems Overview
