Cable feeder machine CABLE DOG – with pushing force of 800 daN.
These machines are indicated for laying big lengths and heavy energy cables up to 120 mm max. diameter
to be installed along difficult routes. They are well tried during cable pulling under heavy conditions as force
assistance for cable pulling winches, especially in that case when due to difficult conditions the max. admissible
pulling force for the cable will be exceeded during the pulling operation with the winch.
Specification
Max pull | Rope diameter | Rope length | Capstans Ø | Engine | Horsepower | Weight | Dimension | Part Number |
(daN) | (mm) | (m) | (mm) | (*) | HP (kW) | (Kg) | (LxBxH m) | |
800 | / | / | / | B | 4 (3) | 190 | 1,43 x 0,68 x 1,10 | VMMS800B |
800 | / | / | / | E | 2 (1,5) | 190 | 1,45 x 0,68 x 1,23 | VMMS800E |
Hydraulic cable laying winches
Related Product
Cable Manager Brush 1U - RAL9005
19" VENTED PANEL WITH BRUSHEnables front to rear cable passage through empty positions in rack&..
AED 80.00
Cable Pulling Grip For FO Cables 06 -12mm
Hand woven galvanized steel wire mesh with a Talurit coupling, and one reinforced pulling ..
AED 145.00
Surge arrester for single-phase system TN-S, 80 kA (8/20 µs)
Pluggable module, visual fault signalling, module locking, remote fault signalling.Two-pole varist..
42U 19"DYNAMIC Single Glass Alu FD,DBL 63%Per RD W800 D1000.
DYNAmic Series Free Standing Cabinets DYNAmic series Networking / Servering Enclosures, provide max..