Cable feeder machine CABLE DOG – with pushing force of 800 daN.
These machines are indicated for laying big lengths and heavy energy cables up to 120 mm max. diameter
to be installed along difficult routes. They are well tried during cable pulling under heavy conditions as force
assistance for cable pulling winches, especially in that case when due to difficult conditions the max. admissible
pulling force for the cable will be exceeded during the pulling operation with the winch.
Specification
Max pull | Rope diameter | Rope length | Capstans Ø | Engine | Horsepower | Weight | Dimension | Part Number |
(daN) | (mm) | (m) | (mm) | (*) | HP (kW) | (Kg) | (LxBxH m) | |
800 | / | / | / | B | 4 (3) | 190 | 1,43 x 0,68 x 1,10 | VMMS800B |
800 | / | / | / | E | 2 (1,5) | 190 | 1,45 x 0,68 x 1,23 | VMMS800E |
Hydraulic cable laying winches
Related Product
Bracket Support 19" For PO Shelf RAL9005- 2/Set
Fixed ShelvesFixed shelves are designed for placing equipment that is not 19" mountable . The entire..
AED 30.00
Galvanised steel spiral duct mandrel
Specificationø:<-->kg72-98 mm330 mm2,2..
BNC Plug 75 Ohms Straight HDTV G51(1.0/4.6/7.7)
The BNC series is the most commonly used coax connector. With its bayonet coupling mechanism this co..