“VT825” is used for environment monitoring (room temperature, humidity, leakage, voltage, vibration,
access, smoke, ...), notifications (SMS, SNMP, E-mail, Video, Alarm beacons) and control of cabinets, data
center, outdoor cabinets, telecom sites and other mission critical facilities.

HARDWARE:		SOFTWARE:
·      CAN port for digital sensors		·   Web interface
·      8 AutoSense RJ-12 ports for sensors		·   Virtual sensors & elements: Group, E-mail,
·      4 dry contact inputs		·   SNMP trap, SNMP Get, SMS, IP cams, PINGs, Triggers, Timers
·      USB port for web camera or for USB flash for saving logs		·   SNMP traps, SMS & E-mail notifications
·      Two 12V 0.25A output relays		·   Supports SNMP v.1, v.2c, v.3
·      100 Mbit Ethernet port		·   Notifications: E-mail, SMS, Syslog, Event log,
·      External chassis earthing		SNMP Trap, SNMP Get
·      LEDs: power, relays, errors, CAN		·   Configurable embedded logic
·      Onboard temperature sensor (1%)		·   Sensor graphing
·      Internal GSM modem extension slot (GSM modem is ordered separately)		·   Multilanguage support
·      Internal “VT10 / 1-Wire extension” slot or		·   User Access and Permissions
·      internal “VT18 / Extension slot” (extensions are ordered separately)

FEATURES:

• Receive notifications of anomalous events via email, SMS / MMS, SNMP traps. • Integrates with network management systems via SNMP v.1 and Encrypted  SNMP v.3. • Uses Linux operating system for maximum stability and flexibility. • Web GUI for PC, smartphones and tablets; free firmware upgrades and utilities. • Monitor up to 30 different sensors using expansion CAN units. • Compatible with full range of different third-party sensors. • Embedded web server displays sensor information and live video from connected cameras.

SCALABILITY:

Following sensors and devices can be connected to “VT825 / Monitoring unit”:

CAN sensors		Description
VT408 / Extension unit		Allows to increase the number of sensors connected to any monitoring unit. Adds 8 analog sensors.
VT430 / Rack control unit		The unit has all possibilities for rack control, PIR sensor for door control, 2 dry contacts, temperature and humidity sensors.
VT440 / Dry contacts unit		Allows to increase the number of dry contacts connected to any  Vutlan monitoring unit. Adds 32 or 64 dry contacts.
VT460 / Smoke, humidity & temperature sensor		Monitors occurrence of smoke, temperature and humidity inside the building.
VT470 / PIR, vibration & temperature sensor		Sensor is needed for control of movement over an infra-red range and measurement of temperature and vibration indoors.
VT490 / Humidity & temperature sensor		Monitors temperature and humidity inside the building.

Embedded modules (ordered separately)		Description
VT700 / GSM modem		Adds ability to receive and send SMS for control and notifications.
VT10 / 1-Wire module or VT18 / Extension board		VT10 adds 1-Wire port to the system. Refer to www.vutlan.com for available 1-Wire Vutlan sensors.  VT18 adds 8 dry contacts inputs, 2 loads & 12V DC power backup terminal

Analog sensors		Description
VT11 / Dry contact OUT		Switchable contact. Can be used together with equipment, for example for switching ON/OFF air conditioners
VT420 / Converter 4-20mA		Converter of current loop 4-20mA
VT500 / Temperature sensor		For measurement of temperature indoors
VT501 / Outdoor temperature sensor		For measurement of temperature outdoors
VT510 / Humidity sensor		Measures relative humidity 10-95% indoors with relative accuracy 5%.
VT520 / AC voltage monitor		Measures AC 110-240V
VT530 / Access sensor		Sensor controls the status of a door or a window: opened, closed
VT540 / Vibration sensor		Detects vibration, allows daisy chain connection