Hydraulic machine suitable tooperate as a tensioner or as a puller to string or recover the conductors or
OPGW of overhead transmission lines. The tension force or the pulling force, are developed through a
pair bullwheels covered by multi grooved nylon sectors. The machine is powered by an hydraulic circuit
which allow to adjust the tension of the conductors at constant force even varying the stringing speed.
While in puller use the hydraulic circuit allow to adjust continuously the pulling force.
Mounted on a sturdy framework with single rigid axle, including hand brake, front share, rear stabilizers
and attachments to anchor the machine to the ground. Electronic instrument working as dynamometer,
meter and speed counter, hours counter, hydraulic circuit control gauges. Negative safety brake with
manual action in tensioner use and automatic in puller use. Hydraulic oil tank with oil cooling system.
Specification
Max tension | Max. speed | Bull-wheels Ø | Engine | Horsepower | Ø Conductor | Weight | Dimension | Part Number |
(daN) | (m) | (mm) | (*) | HP (kW) | (mm) | (Kg) | (LxBxH m) | |
4.500 | 5,0 | 1.500 | D | 88 (65) | 2 x 36 | 3.100 | 4,40 x 2,00 x 2,60 | JVM4002AFAR15 |
Hydraulic tensioners-puller for overhead lines stringing
Related Product
BNC Straight Plug 75 Ohms HDTV Cr/Cr G41(0.6/2.8-4.7)
The BNC series is the most commonly used coax connector. With its bayonet coupling mechanism this co..
BNC Plug Straight CR/CR G13 (0.4/2.5)
The BNC series is the most commonly used coax connector. With its bayonet coupling mechanism this co..
AED 15.30
ERGOCON WorkStation _ Control Room Console _ Workstation Technology Cabinet _ W3100 D1100 _ Curved
Workstation Technology Cabinet:- Maximum technical integration for tower or 19” workstation re..