Pulling winch suitable for both underground cable installations and service winch in multi-purposes works,
hydraulically powered by means of a gasoline egine or electric motor.
Its maximum pulling force is transmitted directly on the rope recovery drum. Mounted on a wheeled framework
the winch is completed of dial dynamometric instrument displays the pulling force, with device for setting of max
pulling force. The winch is provided of automatic negative brake that lock the cable every time the operator
releases the command lever.
Specification
Max pull | Rope diameter | Rope length | Capstans Ø | Engine | Horsepower | Weight | Dimension | Part Number |
(daN) | (mm) | (m) | (mm) | (*) | HP (kW) | (Kg) | (LxBxH m) | |
1500 | 8/9/10 | / | / | B | 11 (8,10) | 325 | 1,40 x 1,20 x 0,90 | JVM1000TA |
1500 | 8/9/10 | / | / | E | 5,5 (4) - 220/380 V | 305 | 1,40 x 1,20 x 0,90 | JVM1000TAE |
Hydraulic winches for underground cable installations and overhead lines stringing
Related Product
Surge protection for 2-core signalling lines, installation close to protected equipment, 12 V DC, max. 0,5 A
Coupling impedance (R – resistance)Coarse and fine surge protection for 2-core signalling linesInsta..
BNC Plug 75 Ohms Straight CR/CR G12
The BNC series is the most commonly used coax connector. With its bayonet coupling mechanism this&nb..
AED 10.71
Lightning current arrester replacement module, for two 1-core signalling lines, 48 V DC, max. 1 A
Pluggable module, coupling impedance (R – resistance), line separated from protective earth via GDT...
Air plug
Specificationø:137-142mm..