The Microflow LOG is for blowing FTTH Fibers (EPFU) and Micro Cables. 

The Microflow LOG is a data driven decision tool which minimize the risk of costly errors due to wrong

blowing techniques. Online diagnostics can show you how the machine operates and how to improve

the utilization. The fiber blowing machine is making work easier for network owners, contractors and

installers as well as duct and cable manufacturers.

Each job ends with a full report on quality based information such as:

•  Stress on the cable
•  Comparison of different types of cables
•  If predetermined blowing limitiation are exceeded
•  Confirmation of job, location and time

Highlights

•  Software operated machine
•  Electronic Hardware
•  Modern connectivity
•  MicroFlow LOG - Deutsche Telekom Template
•  MicroFlow LOG PDF report for DT P. 1
•  MicroFlow LOG PDF report for DT P. 2
•  The Log can be individually adapted
•  Verification of blowing quality (e.g. pressure, length, recommended speed vs blown speed, stress on cable, weather conditions etc).

Benefits

Gives you Data Driven Decision tools for topics like:

• Confirmation of job, location and time (invoicing)
• Quality based documentation such as

o   Stress on the cable

o   Possibility to compare different types of cable and ducts

o   predetermined blowing limitations are exceeded 

• To minimize the risk of costly errors due to wrong blowing technics
• Evaluation of fiber blowing efficiency by team
• Best practice for blowing teams
• Utilization - how is the machine utilized and data to improve it
• Maintenance & Service Recommendation of fiber blowing machine (when, where, what etc.)
• IOT - Online software / feature upgrades • Online diagnostics 

Specifications

Fiber/cable diameter:	0.8 - 6.5 mm
Microduct diameter:	5 - 16 mm
Blowing distance¹ :	Up to 2500 m
Blowing speed¹:	Up to 90 m/min
Recommended pressure and airflow²:	8-16 bar (200-500 l/pr. min.)
Weight (including control unit):	13.2 kg
Length (blowing head/control unit):	250 mm/240 mm
Width (blowing head/control unit):	150 mm/250 mm
Height (blowing head/control unit):	220 mm/80 mm

¹ Depending on type of  microduct and cable

² Cooled and dried air.

MicroFlow LOG and MicroFlow Touch is of course equipped with the unique well-known protection technology

that stops the machine if the fiber cable meets resistance. Any stop is registered by a sensor and the motor

stops. The machine will also stop automatically if the motor exceeds the preset maximum torque level. In both

cases the machine stops immediately so the fiber cables does not get damaged. After the protection technology

has stopped the machine, it will automatically start up again. It will try three times total to get through the obstacle,

if it still has not succeeded it will come to a full stop.