N50 connectors
Protection of coaxial lines and telecommunication equipment. Installation at the boundary of LPZ 0 and LPZ 1 zones at the line input into the building. Suitable for the combined signal installation and power supply.
Parameters
Type of SPD | D1,C2,C3 | |
Location of SPD | ST 1+2 | |
Maximum operating voltage | Uc | 70 v DC |
Nominal load current | IL | 6,000 A |
C2 nominal discharge current (8/20 µs) core-PE | In | 10,00kA |
D1 impulse discharge current (10/350 µs) core-PE | Iimp | 2,50kA |
C3 voltage protection level mode core-PE at 1 kV/µs | Up | 600v |
Response time core-PE | ta | 100ns |
Power | P | 95w |
Wave impedance | Z | 50Ω |
Bandwidth - min | f | 0,00MHZ |
Bandwidth - max | f | 3 500,00 MHz |
Insertion attenuation |
| 0,10 dB |
SWR |
| 1,2 |
|
|
|
Connection (input - output) |
| N 50 |
Degree of protection |
| IP 66 |
Range of operating temperatures - min |
| -40 °C |
Range of operating temperatures - max |
| -80 °C |
According to standard |
| EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012 |
ETIM Class |
| EC001466 |
HX-090 N50 F/M
Related Product
Cable 3C, Shielded, 18 AWG R40003-1A - 305m/Roll
3/C 18 AWG SHIELDED COMMERCIAL AUDIO AND GENERAL PURPOSE LOW VOLTAGE POWER LIMITEDCABLE 60C 300V RIS..
AED 1,030.06
FO Patch Cord 9/125 Dpx OS2 2.0mm LC/APC-SC/APC-3m LSOH
Fiber patch cord for interconnect application is designed for use in data communication, process con..
Cable Drum unreeling frame with teflon rollers
SpecificationǾkg150600-1000 mm9..