Combination of coarse and fine protection of telecommunication equipment including ADSL. For protection of M&C and data lines and ISDN lines. For LSA separating strips .
Technical specifications
Type of SPD | C3,C2 | |
Connection (input - output) | LSA disconnection rail | |
Accessories | grounding rail | |
Location of SPD | ST 2+3 | |
Maximum operating voltage | Un | 120V AC |
Maximum operating voltage | Uc | 170V DC |
Nominal load current | IL | 0,500A |
C2 nominal discharge current (8/20 µs) per core ` | In | 500kA |
C2 total discharge current (8/20 µs) cores-PE | ITotal | 10,00kA |
C2 voltage protection level mode core-PE at In | Up | 280V |
C2 voltage protection level mode core-core at In | 350V | |
C3 voltage protection level mode core-core at 1 kV/µs | Up | 230V |
C3 voltage protection level mode core-PE at 1 kV/µs | Up | 400V |
Response time core-core | ta | 1ns |
Response time core-PE | ta | 100ns |
Serial resistance per core | R | 1,60Ω |
Treshold frequency core-core | f | 65,00MHz |
Degree of protection | IP 20 | |
Range of operating temperatures - min | -40 °C | |
Range of operating temperatures - max | 70 °C | |
Mounting | LSA disconnection rail | |
According to standard | N 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012 | |
ETIM Class | EC001625 |
CLSA-DSL
- Brand: SALTEK - Czech Republic Categories System Accessories Surge Protection Devices
- Product Code: CLSA-DSL MPN: 8595090551768
Related Product
26U 19'' DYNAMIC W=600mm and D=600mm
DYNAmic series Networking / Servering Enclosures, provide maximum optimization resulted to..
1,667.00AED
Duct calibrator with internal space for transmitter
SpecificationPart Numberø-ømm:<-->kgJZ-KAL03434-25210 mm0,4JZ-KAL04444-25210 mm0,4..
Adapters and Cables
Adapters and Cables used to complete your PDU installation. Cables and AdaptersDescriptionPart ..
30.00AED
Elicon Computer Platform Pullout B2000 T305
Can be upgraded at any timeTotal height above floor: 110 mmHandle on frontShelf guide and pull-out s..