Protection of power supply with output from the midle and non-grounded pole. Installation as close as possible to the protected equipment.
Technical specifications
Type of SPD | T3, C2 | |
Connection (input - output) | terminals-terminals | |
Location of SPD | ST 2 | |
Nominal voltage | Un | 48V AC |
Maximum operating voltage | Uc | 60V AC and 60V DC |
Nominal load current | IL | 16,000A |
C2 nominal discharge current (8/20 µs) per core | In | 2,00kA |
C2 voltage protection level mode core-core at In | Up | 370V |
C2 voltage protection level mode core-PE at In | Up | 200v |
Test voltage L+ - L- | 4,0kV | |
Test voltage L+(L-)-PE | 4,0kV | |
voltage protection level L+ - L- | 0,37 kV | |
voltage protection level L+(L-)-PE | 0,27 kV | |
Maximum overcurrent protection | 16 A gL/gG or B 16 A | |
Response time L+ - L- | 25ns | |
Response time L+(L-)-PE | 100ns | |
Cross-section of connected conductors solid (min) | 0,14mm2 | |
Cross-section of connected conductors solid (max) | 4,00 mm2 | |
Cross-section of connected conductors stranded (min) | 0,14 mm2 | |
Cross-section of connected conductors stranded (max) | 2,50 mm2 | |
Fault indication | red indicator | |
Degree of protection | IP 20 | |
Range of operating temperatures - min | -40 °C | |
Range of operating temperatures - max | -70 °C | |
Mounting | DIN rail 35 mm | |
According to standard | EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012, EN 61643-11:2012, IEC 61643-11:2011 |
DMP-024-V/1-FR1
Related Product
Hydraulic winches for underground cable installations and overhead lines stringing
Pulling winch fit for pulling one rope in stringing operations of overhead transmission lines and un..
Cable In/Out FO 4C 62.5/125 CLT LSOH
Optical fibre : Multimode (FOTAG color code) Tube : Thermoplastic material Tube wate..
AED 4.45
Galvanised cable protector with roller
Specificationkg133mm7,0..
Distribution Box Ext 200pr DBF With BMF Empty LSA
prepared for surge protectionhousing with hinged door (opening approx. 180°)prepared for mounting on..
AED 1,063.00