N50 connectors
Protection of coaxial lines and telecommunication equipment. Installation at the boundary of LPZ 0 and LPZ 1 zones at the line input into the building. Suitable for the combined signal installation and power supply.
Parameters
Type of SPD | D1,C2,C3 | |
Location of SPD | ST 1+2 | |
Maximum operating voltage | Uc | 70 v DC |
Nominal load current | IL | 6,000 A |
C2 nominal discharge current (8/20 µs) core-PE | In | 10,00kA |
D1 impulse discharge current (10/350 µs) core-PE | Iimp | 2,50kA |
C3 voltage protection level mode core-PE at 1 kV/µs | Up | 600v |
Response time core-PE | ta | 100ns |
Power | P | 95w |
Wave impedance | Z | 50Ω |
Bandwidth - min | f | 0,00MHZ |
Bandwidth - max | f | 3 500,00 MHz |
Insertion attenuation |
| 0,10 dB |
SWR |
| 1,2 |
|
|
|
Connection (input - output) |
| N 50 |
Degree of protection |
| IP 66 |
Range of operating temperatures - min |
| -40 °C |
Range of operating temperatures - max |
| -80 °C |
According to standard |
| EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012 |
ETIM Class |
| EC001466 |
HX-090 N50 F/M
Related Product
Rack 42U Single Frame 19' Relay & Open - Grey
Canovate Open Frame Racks are designed for a professional cable management in protected datacenterro..
Jensen Tools JTK-46W Communications Kit with Test Equip. in Single Gray Cordura Case
The JTK-46W is packed full of tools needed to access, test, and repair phone equipment, modems, fax,..
Standard Socket Power Cords
IEC 60320 C14 to C19,15A, 100-250V..
Pipe renewal hydraulic winches
Pulling winch fit for pipe renewal,hydraulically powered by a diesel engine.This winch develops its ..