Combination of coarse and fine protection of data and M&C lines. For LSA separating strips.
Technical specifications
Type of SPD | C3,C2 | |
Connection (input - output) | LSA disconnection rail | |
Accessories | grounding rail | |
Location of SPD | ST 2+3 | |
Maximum operating voltage | Un | 25V AC |
Maximum operating voltage | Uc | 36V DC |
Nominal load current | IL | 0,500A |
C2 nominal discharge current (8/20 µs) per core ` | In | 500kA |
C2 total discharge current (8/20 µs) cores-PE | ITotal | 10,00kA |
C2 voltage protection level mode core-PE at In | Up | 400V |
C3 voltage protection level mode core-core at 1 kV/µs | Up | 48V |
C3 voltage protection level mode core-PE at 1 kV/µs | Up | 350V |
Response time core-core | ta | 1ns |
Response time core-PE | ta | 100ns |
Serial resistance per core | R | 1,60Ω |
Treshold frequency core-core | f | 4,00MHz |
Degree of protection | IP 20 | |
Range of operating temperatures - min | -40 °C | |
Range of operating temperatures - max | 70 °C | |
Mounting | LSA disconnection rail | |
According to standard | EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012 | |
ETIM Class | EC001625 |
CLSA-24
Related Product
Advanced Test Kit SM TK077
A small fiber optic test kit, excellent for low to medium test volume on single mode systems.Typica..
BNC Terminator 50 Ohms Insulated 0.5W 100Mhz>=20db
The BNC series is the most commonly used coax connector. With its bayonet coupling mechanism this co..
AED 10.32
Plastic duct brush on teflon kernal
Specificationø:<-->kg117mm330mm1,0..
Shelf Full Pull Out 1U 412x665/900/1200N - RAL7021
With perforation to optimize air supplyLocking in pushed-in and fully pulled out positionEasy mounti..