• Ultra-Stable 2W Loss Length ORL Tester, T23422OLV

A Two-Way Optical Loss Test set (OLTS) that’s perfect for medium to ultra high fiber count loss, length and optical return loss testing applications on single mode fiber at 1310 / 1550 nm. A pair of these compact instruments set new standards of productivity, accuracy and ease of use. The 650 nm VFL Visitester feature mixes a VFL in with the test signal during Autotest. In addition to operating as a typical VFL, it gives positive visual identification of a fiber to be connected for loss testing.

Each SM fiber needs just one test hook-up and one key press for a complete 2W / bidirectional loss, length & ORL test, eliminating administration, training and test errors. Testing is accurate and can take only 5 seconds, direct onto flexible standards-compliant Tier 1 certification reports.

A pair of instruments both display length bi-directional loss, & ORL fiber testing each end, in real time, with no need to specify master/slave instruments. A single instrument can also be used as a stand-alone ultra-stable light source & power meter, VFL, ORL meter, or tone generator / detector.

ORL sensitivity on this model is typically adequate for installed cable testing, but is limited by the PC connector. For best ORL sensitivity, select a model with an APC

  • 25% of the size / weight, 7x the battery life of competitors
  • Bidirectional Autotest loss, length & ORL testing on one fiber
  • Full-feature optical return loss tester
  • Real time Pass / Fail display
  • 8,000 fiber memory and USB key file dump
  • KITS™ reporting software (download)
  • Autotest optical power meter, >25 λ, 1 % accuracy
  • Traceable reports: source stability & λ, meter cal & linearity, ORL cal
  • 80 hr alkaline battery life
  • 3 Year warranty and calibration cycle

 

Write a review

Note: HTML is not translated!
Captcha

Ultra-Stable 2W Loss Length ORL Tester, T23422OLV

0 reviews / Write a review

* Required fields



Related Product

Combination of lightning , TN and TT, 7,5 kA (10/350 µs)

Combination of lightning , TN and TT, 7,5 kA (10/350 µs)

Pluggable module, visual fault signalling, module locking, terminals for supply, onto 40 mm busbar s..

Duct pulling head PN4-PN10

Duct pulling head PN4-PN10

Specificationøkg75mm5,9..

Cable lead-in hose 3m long

Cable lead-in hose 3m long

SpecificationPart NumberkgJT-IF100089mm13,5JT-IF1100102mm14JT-IF1200114mm15..

Surge protection for 2-core high-speed floating signalling lines, 6 V DC, max. 0.5 A

Surge protection for 2-core high-speed floating signalling lines, 6 V DC, max. 0.5 A

Coupling impedance (resistance), screwless terminals.Coarse and fine surge protection of 2-core hi..