Swift KF4 is very versatile and super accurate active cladding alignment fusion splicer that satisfies every aspect

of splicing requirement. With slim, yet rugged and extremely light, budget priced Swift KF4 assures users of

convenient and stable process as well as high performance.

Specifications

Category	Description
Fiber alignment	Active V-Groove Alignment
Applicable type of fibers	0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable
Fiber count	Single fiber
Applicable fiber dimensions	Cladding diameter: 125㎛ / Coating diameter: 150㎛~3mm
Fiber setting and cleaved length	5mm to 16mm
Splicing modes	Splice mode: 300, Heater mode:100
Typical Splice Loss	SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB
Return loss	> 60dB
Splicing Time	Typical 7sec (Standard SM, SM-SM mode)
Splice loss estimate	Available
Sleeve heating time	Typical 13sec with IS-60 mode, IS-60 sleeve
Applicable protection sleeve	40mm,60mm and micro sleeves
Storage of splice result	Date : 5,000 Up to, Image: 5,000 Up to
Tension test	1.96N to 2.25N
Operating condition	Altitude: 5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition	Temperature: -40℃~80℃, Humidity: 0~95%
Dimension	124(W)ｘ189(L)ｘ75(H)mm(Without rubber protector)
Weight	1.1kg(Including battery)
Viewing method and display	Two CMOS cameras and 4,3-inch color LCD monitor
Fiber view and magnification	X/Y : 130X MAX:260X
Power supply	Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
No.of splice cycles with battery	Typical 200 cycles
Electrode life	More than 21,000 times
Terminals	USB