Only - Front Frame Supervented Door for 42U W800 D1000/800 Cabinet – RMF
RMF - DELIVERED UNASSEMBLED ONLY | |
Below units are required to complete the cabinet | |
Code of box | Box contains |
RMF-FF-zz/xx | Front frame and panel for RMF-zz-xx/yy, 2 pairs of 19" vertical extrusions, mounting kit, feet |
RMF-RF-zz/xx | Rear frame and panel for RMF-zz-xx/yy |
RMF-SP-zz/yy | 2 pieces of side panels for RMF-zz-xx/yy |
RMF-TB-xx/yy | Top and bottom covers of RMF-zz-xx/yy |
RMF-HVE-xx/yy * | Holders of vertical extrusions for yy racks; 1 box contains 2pairs of holders |
xx - rack width, yy - rack depth, zz - rack height
* One pack is needed for racks 21U and 33U. Two packs are needed for racks 42U and 45U.
RMF - CABINET Description
The RMF unassembled rack is designed to cope with the demanding needs of IT equipment within the data center, equipment room and network or telecommunications closet. The RMF’s flexible configuration options mean that it’s easy to tailor the solution to your exact requirements. Various height, depth and width options, along with load rating of 400kg, air-flow optimization solutions and flexible cable management mean that it has never been simpler to custom configure a cabinet that meets your requirements. The RMF rack is delivered unassembled for easy transportation into the site where it can be quickly and easily constructed.
Sizes
- Height: 21, 33, 42, and 45U
- Width: 600 and 800mm
- Depth: 600, 800,1000mm
Construction
- Robust frame construction, connected by 24 (32) M6x12 screws
- Delivered unassembled; assembly at installation site
Easy and quick assembly
- 1.5 & 2.0mm sheet steel
Load rating
- Standard 400kg
IP rating
- Standard IP30
- Optionally IP54
- IP20 when perforated doors used
Colors
- Standard RAL 7035, RAL 9005 and RAL 7035/7040
- Optionally other colors
Front door
- Door with swivel handle lock and tinted security glass
- Wide range of doors and locks available optionally
- Reversible door - easy re-hanging to open on right or left (at installation site)
- Door opening angle 180˚
Rear panel
- Removable rear panel with lock
- Wide range of rear doors available optionally
Side panels
- Removable with locks
Cable entries
- Top, bottom, and rear openings for cable entry covered with removable blank panels
Ventilation unit openings
- Ventilation unit can be installed in top or bottom frame
Feet
- Adjustable feet as standard;
- Castors, Lockable Castors, Plinth or Plinth with filter optionally
Other
- Racks can be installed in blocks by using DPDR-7 (ordered separately)
- GND/earthing kit included