The PREMIUM Server RSF rack is designed as a pure server cabinet for data centers, equipment rooms and network or telecommunication closets. RSF’s heavy-duty, all-welded design and 1500 kg load rating mean that it’s possible to accommodate the heavy equipment within a standard rack footprint. The RSF comes with a full range of doors, panels and locks. Available in various heights and depths, RSF is designed to work with Conteg’s airflow optimization solutions and flexible cable management systems, which means that RSF can be tailored to suit your needs. RSF can be used with many complementary systems making your servers safe and secure.

Cabinet Configuration Details

   *Multipoint lock only, these options apply for RSF 800 only.

   **Ready for A/C unit installation; recommended when cooling is planned or required; IP54 when A/C unit installed and Multi lock only.

General  Optimal ROF Cabinet Description

Sizes

• Height: 27, 42, 45, 48, 52U (52U not available for 800 mm depth)
• Width: 600, 800 mm
• Depth: 800, 1 000, 1 200 mm (1 200 mm not available for 27U)

Construction

• Welded-frame design
• 1.5 & 2.0 mm sheet steel

Load rating

• 1 500 kg balanced load (1 000 kg for 27U only)

19" vertical extrusions

• 2 pairs of sliding 19” vertical A-type (600 or 800 mm) extrusions without horizontal holders; (for 800 mm provide additional 24U of installation space – valid for racks 42U and taller), adjustable from inside.
• Optionally 2 pairs of sliding 19” vertical L-type (600 mm) or P-type (800 mm) extrusions (Provide additional 12U of installation space – valid for racks 42U and taller), adjustable from inside, Rear pair of vertical extrusions is divided in up to 3 parts (according to rack’s height) for individual settings according to server depth.

IP rating

• Standard IP20
•  IP40 when solid doors or panels applied
• Optionally up to IP54 with multipoint lock only
• A/C-ready – IP54 when A/C unit installed with multipoint lock only

Colors

• Standard RAL 9 005

Front door

• Vented door – perforation rate 86%
• Swivel handle lock – DIN profi le, universal key 333, multipoint; optionally half profi le cylinder or combination lock single or multipoint (other locks on request)
• Door opening angle 180°
• Easy re-hanging to open on right or left
•  Optionally glass, steel, perforated, glass with perforation, vertically divided door

Rear door

•  Vented door – perforation rate 86%
• Swivel handle lock – DIN profi le, universal key 333, multipoint; optionally half profi le cylinder or combination lock single or multipoint (other locks on request)
• Optionally can be replaced by full range of front doors and panels

Side panels

• Removable with locks

Top plate

• Single-piece design, removable
• 4" (100 mm) rounded cable entry in every corner covered by plastic cap
• 300×100 mm cable entries covered with removable sheet steel blank panels

Bottom plate

• Segmented design, removable
• 4" (100 mm) rounded cable entry in every corner covered by plastic caps
• 300×100 mm cable entries covered with removable sheets steel blank panels

Feet

• Adjustable feet as standard; plinth or plinth with fi lter options

Adaptation

• Possibility to adapt for installation of 21" equipment (on request only for 800 mm width)
• Adaptor DP-RE-01 needed (ordered separately)

Other

• Racks can be installed in blocks by using DP-DR-UNI (ordered separately)
• CoolTeg and CoolSpot cooling units compatible