Cable Sheath Stripping Tool, for fast stripping and removal of sheath from power, copper/fibre cables.
Blade Holder – Metal
Strip Dimension - Strip cables from 6-25mm (.24"-1.0") diameter
Operation:
1. Turn the adjusting nut A to get right exposed length of blade, which meets the cable thickness.
2. Turn adjusting screw B to get the approximate cable diameter (not critical).This diameter is indicated on cable
diameter guide C
3. Open the tool by pushing D upwards, and insert the cable between the blade and the V-shaped holder E and release.
4. Rotate the tool 2-3 times in a clockwise direction, to cut the cable.
5. Swivel the blade by pushing the shaft, and pull the stripper along the cable, to make a longitudinal cut. Pull the cable
out or use the V-shaped cutter to remove the slit insulation.
Cable Stripper Adjustable 4.5-25
Related Product
Surge protection for ISDN telecommunication line, RJ45 sockets
RJ45 socketsCombination of coarse and fine protection for ISDN lines.For protection of one pair o..
Plinth Fixed W800 D1000 For Miracel - RAL7035
StationaryCable entry possible from all sidesPanel front and rear with vent slots and installation o..
VC / VC-E monitor levels – Height-adjustable (1400 H-A 1 Level).
Specification:Optionally as height-fixed or electrically height-adjustable version (150mm adjustmen..
PDU 10Way Left Angled Vertical Unswitched
XAL - Vertical Rack Mount Angled Left16 Amps total loadSupplied with 3mtrs flex to 13A UK fused plug..
AED 340.00





