Fine protector module for Ethernet networks with PoE and general structured cabling.
- Fine surge protection of Ethernet line with PoE and structured cabling networks with signals with amplitudes up to 60 V.
- Installation at the entry of the line into building or close to the protected equipment, at the boundary of LPZ 0 and LPZ 1 or higher.
- For protection of Ethernet line with PoE, IP telephony, KNX, DMX, RS-485, signalling loops and other signals over twisted pairs against surge voltage.
- Suitable for all PoE types - PoE/PoE+/PoE++ (IEEE 802.3 af/at/bt).
- Installation into DL-PL-RACK-1U box.
- DL-...-M with front output.
- Dl-...-m-R with rear output.
Specifications:
|
Parameter
name |
Parameter value |
|
|
Type of SPD |
C2,C3 |
|
|
Location of SPD |
ST 2+3 |
|
|
Mounting |
DL-PL-RACK-1U |
|
|
Maximum operating
voltage core-core |
Uc |
60 V DC |
|
Maximum operating
voltage pair-pair (POE) |
Uc |
60 V DC |
|
Nominal load current
per core at 25 °C |
IL |
0.5 A |
|
Treshold frequency
core-core |
f |
250.00 MHz |
|
Insertion attenuation
at treshhold frequency |
2.90 dB |
|
|
C2 nominal discharge
current (8/20 µs) core-core |
In |
0.20 kA |
|
C2 nominal discharge
current (8/20 µs) per core |
In |
0.20 kA |
|
C2 total discharge
current (8/20 µs) cores-PE |
ITotal |
1.60 kA |
|
C2 voltage protection
level mode core-core (@Uoc/In) |
Up |
130,00 V (0,4 kV / 0,2 kA) |
|
C2 voltage protection
level mode core-PE (@Uoc/In) |
Up |
400,00 V (0,4 kV / 0,2 kA) |
|
C2 voltage protection
level mode pair-pair (POE) (@Uoc/In) |
Up |
130,00 V (0,4 kV / 0,2 kA) |
|
C3 voltage protection
level mode core-core (@In - 1 kV/µs) |
Up |
130,00 V (10 A) |
|
C3 voltage protection
level mode core-PE (@In - 1 kV/µs) |
Up |
600,00 V (10 A) |
|
C3 voltage protection
level mode pair-pair (POE) (@In - 1 kV/µs) |
Up |
130,00 V (10 A) |
|
Response time
core-core |
ta |
1 ns |
|
Response time core-PE |
ta |
100 ns |
|
Connection (input -
output) |
RJ 45/RJ 45 |
|
|
Degree of protection |
IP 30 (without connectors IP 10) |
|
|
Range of ambient
temperatures (min/max) |
-10 / 50 °C |
|
|
Humidity |
15 - 85 % |
|
|
According to standard |
EN 61643-21+A1,A2:2013, IEC 61643-21+A1,A2:2012 |
|
|
Customs tariff number |
85363010 |
|
|
EAN |
8595090542100 |
Fine surge protector module ,60 V
- Brand: SALTEK - Czech Republic Categories Surge Protection Devices
- Product Code: DL-Cat.6A-60V-M
- MPN: DL-Cat.6A-60V-M
Terms & Conditions
All prices are subject to confirmation and exclude applicable taxes unless otherwise stated. Payment terms are as agreed in the quotation or invoice. Orders will be processed only after payment confirmation or receipt of an approved purchase order, where applicable. Dafnia reserves the right to modify product pricing, availability, and payment terms without prior notice.
Related Product
Heavy Duty 400V Surge Protected Office Power Outlet Strip
Specifications: Combi ON-OFF switch with integrated signal light Optimal user protection ..
Isolation spark gap, 50 kA (10/350 µs), screws, withstand voltage 100 V DC.
Two M8 bolts with nuts.Encapsulated high-performance isolating spark gap.For indirect connection (ea..
Isolation spark gap, 50 kA (10/350 µs), screws, withstand voltage 50 V DC.
Two M8 bolts with nuts.Encapsulated high-performance isolating spark gap.For indirect connection (ea..
Replacement module for FLP-PV700 V/U.
Replacement module for FLP-PV700 V/U.Specifications:Parameter name Parameter valu..