Pluggable module, coupling impedance (R – resistance), line separated from protective earth via GDT.
- Lightning current arrester with coarse and fine surge protection for two 1-core signalling lines.
- Installation at the boundary of LPZ 0 and LPZ 1 zones or higher, at the line entry into building and also installation close to protected device.
- For protection of communication interfaces of I&C, MaR systems, electronic security and fire detection systems, etc. (mainly for RS-485 interfaces) against impact of surge voltage.
- Coarse and fine surge protection (core – GND) in differential mode and coarse surge protection in common mode (line – PE).
Specifications:
|
Parameter name |
Parameter value |
|
|
Type of SPD |
D1,C2 |
|
|
Location of SPD |
ST 1+2+3 |
|
|
Mounting |
DIN rail 35 mm |
|
|
Nominal voltage |
Un |
24 V DC |
|
Maximum operating voltage |
Uc |
25.00 V AC |
|
Maximum operating voltage |
Uc |
36.00 V DC |
|
Nominal load current |
IL |
2.000 A |
|
Treshold frequency core-core |
f |
4.00 MHz |
|
Serial resistance per core |
R |
0.40 Ω |
|
D1 impulse discharge current
(10/350 µs) per core |
Iimp |
2.50 kA |
|
D1 total discharge current
(10/350 µs) cores-PE |
ITotal |
5.00 kA |
|
C2 nominal discharge current
(8/20 µs) GND-PE |
In |
10.00 kA |
|
C2 nominal discharge current
(8/20 µs) per core |
In |
10.00 kA |
|
C2 total discharge current
(8/20 µs) cores-PE |
ITotal |
20.00 kA |
|
C3 nominal discharge current
(10/1000 µs) core-PE |
ISM |
10 A |
|
C3 nominal discharge current
(10/1000 µs) core-core |
ISM |
10 A |
|
C3 voltage protection level
mode GND-PE at 1 kV/µs |
Up |
550.00 V |
|
C3 voltage protection level
mode core-GND at 1 kV/µs |
Up |
46.00 V |
|
Response time core-GND |
ta |
1 ns |
|
Response time GND-PE |
ta |
100 ns |
|
Connection (input - output) |
terminals-terminals |
|
|
Cross-section of connected
conductors solid (min) |
0.14 mm2 |
|
|
Cross-section of connected
conductors solid (max) |
4.00 mm2 |
|
|
Cross-section of connected
conductors stranded (min) |
0.14 mm2 |
|
|
Cross-section of connected
conductors stranded (max) |
2.50 mm2 |
|
|
Degree of protection |
IP 20 |
|
|
Range of ambient temperatures
(min/max) |
-40 / 70 °C |
|
|
According to standard |
EN 61643-21+A1,A2:2013, IEC
61643-21+A1,A2:2012 |
|
|
ETIM Class |
EC001625 |
|
|
Plug module |
BDM-024-V/2-J-0 |
|
|
Customs tariff number |
85363010 |
|
|
EAN |
8595090564171 |
Lightning current arrester , replacement module ,for two 1-core signalling lines, 24 V DC, max. 2 A
- Brand: SALTEK - Czech Republic Categories Surge Protection Devices
- Product Code: BDM-024-V/2-JFR2
- MPN: BDM-024-V/2-JFR2
Terms & Conditions
All prices are subject to confirmation and exclude applicable taxes unless otherwise stated. Payment terms are as agreed in the quotation or invoice. Orders will be processed only after payment confirmation or receipt of an approved purchase order, where applicable. Dafnia reserves the right to modify product pricing, availability, and payment terms without prior notice.
Related Product
Heavy Duty 400V Surge Protected Office Power Outlet Strip
Specifications: Combi ON-OFF switch with integrated signal light Optimal user protection ..
Isolation spark gap, 50 kA (10/350 µs), screws, withstand voltage 100 V DC.
Two M8 bolts with nuts.Encapsulated high-performance isolating spark gap.For indirect connection (ea..
Isolation spark gap, 50 kA (10/350 µs), screws, withstand voltage 50 V DC.
Two M8 bolts with nuts.Encapsulated high-performance isolating spark gap.For indirect connection (ea..
Replacement module for FLP-PV700 V/U.
Replacement module for FLP-PV700 V/U.Specifications:Parameter name Parameter valu..