Pluggable module, coupling impedance (R – resistance),
line separated from protective earth via GDT.
- Lightning current arrester with coarse and
fine surge protection for 2-core signalling lines.
- Installation at the boundary of LPZ 0 and LPZ
1 zones or higher, at the line entry into building and also installation close
to protected device.
- For protection of communication interfaces of
I&C, MaR systems, electronic security and fire detection systems, etc.
(mainly for RS-485 inter- faces) against impact of surge voltage.
- Coarse and fine surge protection (core – core) in differential mode and coarse surge protection in common mode (line – PE).
Specifications:
Parameter name |
Parameter
value |
|
|
Type of SPD |
D1,C2 |
|
|
Location of SPD |
ST 1+2+3 |
|
|
Mounting |
DIN rail 35 mm |
|
|
Nominal voltage |
Un |
6 V DC |
|
Maximum operating voltage |
Uc |
6.00 V AC |
|
Maximum operating voltage |
Uc |
8.50 V DC |
|
Nominal load current |
IL |
2.000 A |
|
Treshold frequency core-core |
f |
1.20 MHz |
|
Serial resistance per core |
R |
0.40 Ω |
|
D1 impulse discharge current
(10/350 µs) per core |
Iimp |
2.50 kA |
|
D1 total discharge current
(10/350 µs) cores-PE |
ITotal |
5.00 kA |
|
C2 nominal discharge current
(8/20 µs) GND-PE |
In |
10.00 kA |
|
C2 nominal discharge current
(8/20 µs) per core |
In |
10.00 kA |
|
C2 total discharge current
(8/20 µs) cores-PE |
ITotal |
20.00 kA |
|
C3 nominal discharge current
(10/1000 µs) core-PE |
ISM |
10 A |
|
C3 nominal discharge current
(10/1000 µs) core-core |
ISM |
10 A |
|
C3 voltage protection level
mode GND-PE at 1 kV/µs |
Up |
550.00 V |
|
C3 voltage protection level
mode core-GND at 1 kV/µs |
Up |
550.00 V |
|
C3 voltage protection level
mode core-core at 1 kV/µs |
Up |
12 V |
|
Response time core-core |
ta |
1 ns |
|
Response time core-GND |
ta |
100 ns |
|
Response time GND-PE |
ta |
100 ns |
|
Connection (input - output) |
terminals-terminals |
|
|
Cross-section of connected
conductors solid (min) |
0.14 mm2 |
|
|
Cross-section of connected
conductors solid (max) |
4.00 mm2 |
|
|
Cross-section of connected
conductors stranded (min) |
0.14 mm2 |
|
|
Cross-section of connected
conductors stranded (max) |
2.50 mm2 |
|
|
Degree of protection |
IP 20 |
|
|
Range of ambient temperatures
(min/max) |
-40 / 70 °C |
|
|
According to standard |
EN 61643-21+A1,A2:2013, IEC
61643-21+A1,A2:2012 |
|
|
ETIM Class |
EC001625 |
|
|
Plug module |
BDG-006-V/1-0 |
|
|
Customs tariff number |
85363010 |
|
|
EAN |
8595090564690 |
Dimensions:
Lightning current arrester replacement module for 2-core signalling lines, 6 V DC, max. 2 A
Related Product
Isolation spark gap, 50 kA (10/350 µs), screws, withstand voltage 100 V DC.
Two M8 bolts with nuts.Encapsulated high-performance isolating spark gap.For indirect connection (ea..
Isolation spark gap, 50 kA (10/350 µs), screws, withstand voltage 50 V DC.
Two M8 bolts with nuts.Encapsulated high-performance isolating spark gap.For indirect connection (ea..
Replacement module for FLP-PV700 V/U.
Replacement module for FLP-PV700 V/U.Specifications: Parameter name ..
Replacement module for SLP-PV500 V/U.
Replacement module for SLP-PV1000 V/Y (S).Specifications: Parameter name ..