Coupling impedance (resistance), screw terminals
- Coarse and fine surge protection for two 1-core signalling networks
- Installation close to protected equipment
- For protection of communication interfaces and control circuits of I&C, electronic security and fire detection systems, etc. against impact of surge voltage
- Coarse and fine surge protection in common mode (core – PE)
Specifications:
|
Parameter name |
Parameter value |
|
|
Type of SPD |
C2,C3 |
|
|
Location of SPD |
ST 2+3 |
|
|
Mounting |
DIN rail 35 mm |
|
|
Nominal voltage |
Un |
12 V DC |
|
Maximum operating voltage |
Uc |
11.00 V AC |
|
Maximum operating voltage |
Uc |
16.00 V DC |
|
Nominal load current |
IL |
0.500 A |
|
Treshold frequency core-core |
f |
2.00 MHz |
|
Serial resistance per core |
R |
1.60 Ω |
|
D1 impulse discharge current (10/350 µs) per core |
Iimp |
0.50 kA |
|
D1 total discharge current (10/350 µs) cores-PE |
ITotal |
1.00 kA |
|
C2 nominal discharge current (8/20 µs) per core |
In |
5.00 kA |
|
C2 total discharge current (8/20 µs) cores-PE |
ITotal |
10.00 kA |
|
C2 voltage protection level mode core-PE at In |
Up |
40 V |
|
C3 voltage protection level mode core-PE at 1 kV/µs |
Up |
20 V |
|
Response time core-PE |
ta |
1 ns |
|
Connection (input - output) |
terminals-terminals |
|
|
Cross-section of connected conductors solid (min) |
0.14 mm2 |
|
|
Cross-section of connected conductors solid (max) |
4.00 mm2 |
|
|
Cross-section of connected conductors stranded (min) |
0.14 mm2 |
|
|
Cross-section of connected conductors stranded (max) |
2.50 mm2 |
|
|
Degree of protection |
IP 20 |
|
|
Range of ambient temperatures (min/max) |
-40 / 70 °C |
|
|
According to standard |
EN 61643-21+A1,A2:2013,
IEC 61643-21+A1,A2:2012 |
|
|
ETIM Class |
EC001625 |
|
|
Customs tariff number |
85363010 |
|
|
EAN |
8595090551447 |
Dimensions:
Surge protection for two 1-core signalling networks, terminal block with screw terminals, 12 V DC, max. 0.5 A
Related Product
AC diverter ,for suppression of AC voltage
SPD for Cathodic Corrosion Protection System.Combines an AC current diverter and a SPD in one enclos..
Digital tester for status monitor of SPDs
Measurement of insulation resistance. It can be used to provide a more accurate imagine of the SPD s..
Automatic VLD class 2 tester
Portable automatic tester of VLD class 2.Fully automatic measurement.Measurement of Non-triggering v..
Voltage limiting device, VLD of class 2.2, type VLD-O+F
Voltage limiting device, VLD of class 2.2, type VLD-O+F, limiting of occurrence non-permissible touc..