SALTEK DP-012-V/1-F16 SPD – Data, Signalling and Telecommunication

Pluggable module, visual fault signalling, middle conductor separated from protective earth via GDT.

Surge protection for all types of LV electric and electronic equipments against surge voltage.
Installation to LV installations, close to protected equipment.
For protection of the equipments against impact of induced overvoltages during a lightning strike or switching overvoltages.

Specifications:

Parameter name		Parameter value
Type of SPD		T3, C2
Location of SPD		ST 2
Mounting		DIN rail 35 mm
Nominal voltage	U_n	12 V AC
Maximum operating voltage	U_c	20.00 V AC
Maximum operating voltage	U_c	20.00 V DC
Nominal load current	I_L	16.000 A
Maximum overcurrent protection		16 A gL/gG or B 16 A
C2 nominal discharge current (8/20 µs) per core	I_n	2.00 kA
Test voltage L+ - L-		4.0 kV
Test voltage L+(L-)-PE		4.0 kV
Test voltage M-PE		4.0 kV
voltage protection level L+ - L-		0.18 kV
voltage protection level L+(L-)-PE		0.75 kV
voltage protection level M-PE		0.75 kV
C2 voltage protection level mode core-PE at In		750.00 V
C2 voltage protection level mode core-PE at In	U_p	750 V
C2 voltage protection level mode core-core at In	U_p	180 V
Response time L+ - L-		25 ns
Response time L+(L-)-PE		100 ns
Response time M-PE		100 ns
Connection (input - output)		terminals-terminals
Cross-section of connected conductors solid (min)		0.14 mm²
Cross-section of connected conductors solid (max)		4.00 mm²
Cross-section of connected conductors stranded (min)		0.14 mm²
Cross-section of connected conductors stranded (max)		2.50 mm²
Fault indication		red indicator
Degree of protection		IP 20
Range of ambient temperatures (min/max)		-40 / 70 °C
Humidity		5 - 95 %
According to standard		EN 61643-21+A1,A2:2013, IEC 61643-21+A1,A2:2012, EN 61643-11:2012, IEC 61643-11:2011
ETIM Class		EC000942
Plug module		DP-012-V/1-0
Customs tariff number		85363030
EAN		8595090556640