RJ45 sockets, PCB, with injector.
- Combination of coarse and fine protection of
Ethernet line with PoE.
- Instalation at the entry of the line into
building and close to protected equipment, at the boundary of LPZ 0 and LPZ 1
or higher.
- For protection of Ethernet line Cat. 6 or
Cat. 6A with PoE (Power over Ethernet) in mode A or B against surge voltage.
- For assembly to DL-CS-RACK-1U-INJECTOR.
Specifications:
|
Parameter name |
Parameter value |
|
|
Type
of SPD |
D1,C2,C3 |
|
|
Location
of SPD |
ST 1+2+3 |
|
|
Mounting |
DL-CS-RACK-1U-INJECTOR |
|
|
Maximum
operating voltage |
Uc |
8.50 V DC |
|
Maximum
operating voltage POE |
Uc |
58.00 V DC |
|
Nominal
load current per core at 25 °C |
IL |
0.5 A |
|
Treshold
frequency core-core |
f |
250.00 MHz |
|
Insertion
attenuation at treshhold frequency |
1.20 dB |
|
|
D1
total discharge current (10/350 µs) cores-PE |
ITotal |
2.00 kA |
|
C2
nominal discharge current (8/20 µs) per core |
In |
0.15 kA |
|
C2
total discharge current (8/20 µs) cores-PE |
ITotal |
10.00 kA |
|
C2
voltage protection level mode core-PE at In = 1,25 kA |
Up |
700.00 V |
|
C2
voltage protection level mode core-core at In |
Up |
70 V |
|
C3
voltage protection level mode (POE) at 1 kV/µs |
80.00 V |
|
|
C2
voltage protection level mode (POE) at In = 1,25 kA |
Uc |
90.00 V |
|
C3
voltage protection level mode core-PE at 1 kV/µs |
Up |
500 V |
|
C3
voltage protection level mode core-core at 1 kV/µs |
Up |
80 V |
|
Response
time core-core |
ta |
1 ns |
|
Response
time core-PE |
ta |
100 ns |
|
Connection
(input - output) |
RJ 45/RJ 45 |
|
|
Degree
of protection |
IP 20 |
|
|
Range
of ambient temperatures (min/max) |
-40 / 80 °C |
|
|
Humidity |
5 - 95 % |
|
|
According
to standard |
EN 61643-21+A1,A2:2013, IEC 61643-21+A1,A2:2012 |
|
|
Customs
tariff number |
85363030 |
|
|
EAN |
8595090565703 |
Dimensions:
Surge protection for Ethernet 1 Gbit/s (Cat. 6) or 10 Gbit/s (Cat. 6A), 2 kA (10/350 µs).
Related Product
Replacement module for BDG-024-V/1-xRx
SPD - for data, signalling and telecommunications lines / I&C / Spare modules.Replacement module..
AC diverter ,for suppression of AC voltage
SPD for Cathodic Corrosion Protection System.Combines an AC current diverter and a SPD in one enclos..
Digital tester for status monitor of SPDs
Measurement of insulation resistance. It can be used to provide a more accurate imagine of the SPD s..
Automatic VLD class 2 tester
Portable automatic tester of VLD class 2.Fully automatic measurement.Measurement of Non-triggering v..