SALTEK - SLP-440 V/1 - SPD - for low voltage| DAFNIA

Pluggable module, visual fault signalling.

Varistor surge arrester.
Installation to LV installations, especially to sub-distribution boards.
For protection of the installations and equipments against impact of induced overvoltages during a lightning strike or switching overvoltages.

Specifications:

Parameter name		Parameter value
Type of SPD		T2
Mounting		DIN rail 35 mm
Nominal voltage	U_n	400 V AC
Maximum operating voltage	U_c	440.00 V AC
Maximum operating voltage	U_c	585.00 V DC
Type of network		TN
Maximum overcurrent protection		125 A gL/gG
Short-circuit current rating	I_SCCR	25.0 kA
Nominal discharge current (8/20 µs)	I_n	20.00 kA
Maximum discharge current (8/20 µs)	I_max	40.00 kA
Voltage protection level	U_p	1.90 kV
Voltage protection level at 5 kA	U_p	1.50 kV
Response time	t_a	25 ns
TOV 5 s L-N		580 V
TOV characteristic (TOV 5 s)		withstand
Cross-section of connected conductors solid (min)		1.00 mm²
Cross-section of connected conductors solid (max)		35.00 mm²
Cross-section of connected conductors stranded (min)		1.00 mm²
Cross-section of connected conductors stranded (max)		25.00 mm²
Fault indication		red indication field
Degree of protection		IP 20
Range of ambient temperatures (min/max)		-40 / 80 °C
Humidity		5 - 95 %
According to standard		EN 61643-11:2012, IEC 61643-11:2011
ETIM Class		EC000941
Plug module		SLP-440 V/0
Customs tariff number		85363030
EAN		8595090518174

Dimensions:

Replacement module: SLP-440 V/0

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating

Captcha

Enter the code in the box below

All prices are subject to confirmation and exclude applicable taxes unless stated otherwise.
Payment terms are outlined in the respective quotation or invoice.
Orders will be processed once payment is confirmed or an approved purchase order is received, where applicable.
Prices, availability, and payment terms are subject to change without prior notice.