N-Plug Straight Solder/Clamp 50 Ohms

The N series is a very popular coax connector. It is a medium sized, precision, weatherproof connector supplied with

a screw coupling. In some applications this connector can be used up to 11 GHz. Only 50 Ω impedances are available.

Connector styles are available for flexible, conformable, semi-rigid and corrugated cable types. Both crimp and clamp

cable termination processes are used for this series. Special design techniques for this series of connectors have resulted

in excellent levels of performance with regard go return

loss (VSWR) and intermodulation distortion. Applications for these connectors vary from signal and data transmission

where vibration resistance and environmental protection is required. N series provides a medium-power high-frequency

solution for coax connections.

Mating face sealing for N connectors between plug and jack (mated) according to IP 68. The classifications are general

statements for the relevant series. Individual connectors may deviate from the values shown. If in doubt, please consult our engineers.

Technical Attributes:

Cable group; cable

G37 (2.7/7.25); G42 (2.7/7.1); H500; Aircom Plus

H 1000

H 2000

RT 50/20

213RT5

9914

9913

SPEEDFOAM 400 HFJ

2.7/7.3 AF

2.7/7.3 CF

213CRT7 LOW LOSS

7810A WCX400

9913F C2FCP C2FP CNT-400

HPF 400

MRC 400 AFB TZC 500 32

WBC-400

LMR-400

H 500

AIRCOM PLUS

Remarks

solder/clamp; pressure sleeve IP 67

Assembly

B82

Ω

Mechanical Characteristics:

Recommended coupling torque	4 - 6 Nm
Durability (mating cycles)	≥ 500
Material: spring contacts	CuBe2, CuNi1Pb1P(C97)
Material: outer conductor	CuZn39Pb3
Material: other metal parts	CuZn39Pb3
Material: insulators	PTFE PTFE
Material: gaskets	Silicone, NBR Silicone
Finish: Inner conductor	Cu2Ag5
Finish: Outer conductor	CuSnZn3 (Telealloy); Ag2CuSnZn0.5 (Optargen)
Finish: Other metal parts	CuSnZn3 (Telealloy), Cu2Ni5