The EasySplicer is a swedish made Fusion Splicer, designed for working daily with fiber optic installations.

It´s small and handy to bring along to any kind of work. The construction is made very rugged and even if splicing

should take place under good conditions (indoors) it is still designed to be used out in the field.

The design of the EasySplicer differs a bit from other Fusion Splicers as it is made with focus on the installer/user.

Many of the Splicers on the market are, even if very competent, difficult to use and require a lot education before

they can be operated. The EasySplicer is very easy to learn how to use. It doesn´t take more than an hour for anyone

to learn how to use the Splicer and start working with it.

The EasySplicer operates with three buttons only and mostly the user only have to use the main button to perform the splicing.

Still, the precision of the unit is extremely high. It makes typical splicing with a loss of 0,03dB (Singlemode). After splicing it

pull tests the splice and makes a loss estimation of the splice were it also tells if something is wrong. Such information is also

provided before splicing (like; Bad fiber and Dirty fiber).

Features

Specification

Fiber Types	SMF, MMF 50/125µm and 62.5/125µm fiber, 250µm primary and 900µm secondary coated fiber.
Fiber Handling	Fiber holders, 2 pairs (250 and 900)
Typical Splice Loss	0.03dB SMF, 0.01dB MMF
Typical Cycle Time	7s + 50s (splice cycle + oven cycle)
Sleeve Dimensions	Max 64mm length, 2-5mm diameter supported by oven
Communication	USB, mini usb plug.
Memory	Internal 1MB, External SD-Card.
Monitor	LCD, color, 2.8 , 320x240 pixels
Magnification	Camera 140x
Operating Environment	0-40°C, max 95% RH, non-condensing
Size	230x98x53mm
Weight	800g
Power Sources	External power supply, 6V, 1.25A, 100-240VAC 50-60Hz, Built in Li-Ion battery pack
Splicing Capacity	40 splicing cycles
Additional Features	Loss estimation, Fiber fault detection, SD-card for logging etc.