Cable feeder machine CABLE DOG – with pushing force of 800 daN.
These machines are indicated for laying big lengths and heavy energy cables up to 120 mm max. diameter
to be installed along difficult routes. They are well tried during cable pulling under heavy conditions as force
assistance for cable pulling winches, especially in that case when due to difficult conditions the max. admissible
pulling force for the cable will be exceeded during the pulling operation with the winch.
Specification
Max pull | Rope diameter | Rope length | Capstans Ø | Engine | Horsepower | Weight | Dimension | Part Number |
(daN) | (mm) | (m) | (mm) | (*) | HP (kW) | (Kg) | (LxBxH m) | |
800 | / | / | / | B | 4 (3) | 190 | 1,43 x 0,68 x 1,10 | VMMS800B |
800 | / | / | / | E | 2 (1,5) | 190 | 1,45 x 0,68 x 1,23 | VMMS800E |
Hydraulic cable laying winches
Related Product
Cable Control 2C 1.5sqmm LIHH/16AWG UNSCN - 305m/Roll-LSOH
Areas of UseLIHH cables are used in the industrial applications for indoor use for signal transmissi..
AED 2.91
Cable Internal 4pr SFTP CAT6A LSOH (550MHZ-100OM)500m-Grey
Applications10 Gigabit high speed data transmission cables are designed for horizontal cable distrib..
BNC Plug 75 Ohms CR/CR G31 RG11A/U
The BNC series is the most commonly used coax connector. With its bayonet coupling mechanism this co..
AED 26.67
TNC Plug, 50 Ohms For RG58 Cable
The TNC series is a commonly used coax connector. The same size as BNC connectors, but with a thread..
AED 9.00