Cable feeder machine CABLE DOG – with pushing force of 800 daN.
These machines are indicated for laying big lengths and heavy energy cables up to 120 mm max. diameter
to be installed along difficult routes. They are well tried during cable pulling under heavy conditions as force
assistance for cable pulling winches, especially in that case when due to difficult conditions the max. admissible
pulling force for the cable will be exceeded during the pulling operation with the winch.
Specification
Max pull | Rope diameter | Rope length | Capstans Ø | Engine | Horsepower | Weight | Dimension | Part Number |
(daN) | (mm) | (m) | (mm) | (*) | HP (kW) | (Kg) | (LxBxH m) | |
800 | / | / | / | B | 4 (3) | 190 | 1,43 x 0,68 x 1,10 | VMMS800B |
800 | / | / | / | E | 2 (1,5) | 190 | 1,45 x 0,68 x 1,23 | VMMS800E |
Hydraulic cable laying winches
Related Product
42U 19" DYNAMIC W/o Front Door, W/Dbl 63% Per RD W800 D1000.
DYNAmic Series Free Standing Cabinets DYNAmic series Networking / Servering Enclosures, provide ma..
Knürr Elicon® VC-E Working Surfaces Curved (W- 2200, H- 900).
Specification:Single table. Height adjustment range: 650 mm to 1250 mm. Only usable in ..
SPD for high-speed Ethernet networks, LPZ 1 and higher
LPZ 1 and higher, Ethernet without PoEFine surge protection.Installation at protected device inside ..
Cable Bearers Wall Type No.3: 508mm X 5mm
Cable bracket and bearerManufactured from galvanised mild steel to BS EN ISO 1461 : 1999Mounted to t..





