Hydraulic machine suitable to operate as a tensioner or as a puller to string or recover the conductors or
OPGW of overhead transmission lines. The tension force or the pulling force, are developed through a pair
bullwheels covered by multi grooved nylon sectors. The machine is powered by an hydraulic circuit which
allow to adjust the tension of the conductors at constant force even varying the stringing speed. While in
puller use the hydraulic circuit allow to adjust continuously the pulling force.
Mounted on a sturdy framework with single rigid axle, including hand brake, front share, rear stabilizers
and attachments to anchor the machine to the ground. Electronic instrument working as dynamometer,
meter and speed counter, hours counter, hydraulic circuit control gauges. Negative safety brake with
manual action in tensioner use and automatic in puller use. Hydraulic oil tank with oil cooling system.
Specification
Max tension | Max. speed | Bull-wheels Ø | Engine | Horsepower | Ø Conductor | Weight | Dimension | Part Number |
(daN) | (m) | (mm) | (*) | HP (kW) | (mm) | (Kg) | (LxBxH m) | |
4.500 | 5,0 | 1.200 | D | 88 (65) | 2 x 36 | 3.100 | 4,10 x 2,00 x 2,20 | JVM4002AFAR12 |
Hydraulic tensioners-puller for overhead lines stringing
Related Product
Plier Diagonal Cutter 4-3/8" Long
Semi-flush cut for most types of small wire used in electronic work. Spring-loaded handles. Overall ..
Cable Pulling Grip With One Eye 19 - 25mm L700mm - 2800kgs
Hand woven galvanized steel wire mesh with a Talurit coupling, and one reinforced pulling ..
AED 218.00
Face Plate 6C Double
Face Plate 6C Double..
Air plug
Air Plug - Piston with air tight sealsSpecificationPart Numberø:JZ-TP440041-46mm..





