Fine protection for one port of Ethernet Cat. 5e. installation at the boundary of LPZ 2 and LPZ 3 zones directly in front of the device.
Technical specifications
Type of SPD | C2,C3 | |
Location of SPD | ST 3 | |
Maximum operating voltage | Uc | 6V DC and 9V DC |
Nominal load current | IL | 0,500A |
C2 nominal discharge current (8/20 µs) per core | In | 0,20kA |
C2 total discharge current (8/20 µs) cores-PE | ITotal | 1,60kA |
C2 voltage protection level mode core-core at In | Up | 40V |
C2 voltage protection level mode core-PE at In | Up | 350V |
C3 voltage protection level mode core-core at 1 kV/µs | Up | 65V |
C3 voltage protection level mode core-PE at 1 kV/µs | Up | 350V |
Response time core-core | ta | 1ns |
Response time core-core | ta | 100ns |
Insertion attenuation at 250 MHz | 1,20dB | |
Connection (input - output) | RJ 45/RJ 45 | |
Degree of protection | IP 20 | |
Range of operating temperatures - min | -40 °C | |
Range of operating temperatures - max | 80 °C | |
According to standard | EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012 | |
ETIM Class | EC000943 |
DL-Cat. 5e
- Brand: SALTEK - Czech Republic Categories Surge Protection Devices
- Product Code: DL-Cat. 5e
- MPN: 8595090533757
Terms & Conditions
All prices are subject to confirmation and exclude applicable taxes unless otherwise stated. Payment terms are as agreed in the quotation or invoice. Orders will be processed only after payment confirmation or receipt of an approved purchase order, where applicable. Dafnia reserves the right to modify product pricing, availability, and payment terms without prior notice.
Related Product
Module of surge protection, input terminals/output cores, 10 A
Input terminals/output cores,fault signalling by supply interruption.Surge arrester especially for..
Cutter Diagonal 6" Eurotool
Cut : Semi-Flush..
Battery-Operated Crimper, D3 Groove, 4 Ah
Klein's battery-operated cable crimper is engineered to make linemen's work more efficient by reduc..
Knürr Dacobas® 19” Cabinet Type B, Width 800 mm without front door, D 870 mm(Mobile).
Specification:With fixed 19“ mounting on the front and rear for DIN EN 60297-3 compliant component..