SPD for Cathodic Corrosion Protection System.
- Combines an AC current diverter and a SPD in one enclosure.
- AC diverter leads AC currents to earth, so it eliminates the negative influence of induced AC voltages on the protected steel pipe lines. AC corrosion currents can appear on the pipe lines installed in parallel to high voltage overhead lines.
- SPD part protects the cathodic protection system against direct or indirect lighting strokes up to 100 kA (10/350 μs).
- Conducts AC currents up to 40 A to ground but doesn't affect the function of the cathodic protection system nor the leakage signal of 10 kHz.
- More CP-40 devices can be connected in parallel to reach higher current (80, 120 and more Amps).
Specifications:
|
Parameter name |
Parameter value |
|
|
Maximum continuous DC operating voltage (P-E) |
Umax |
18 V |
|
Maximum leakage current at Umax (P-E) |
IL |
1.0 mA |
|
Lightning impulse current |
Iimp |
100.00 kA |
|
Nominal discharge current (8/20 µs) |
In |
100.00 kA |
|
Maximum peak AC current 1 s / 50 Hz (P-E) |
Imax |
400 A |
|
Maximum continuous AC current 50 Hz (P-E) |
IA |
40 A |
|
100 : 1 |
||
|
Degree of protection |
IP 65 |
|
|
Range of ambient temperatures (min/max) |
-25 / 80 °C |
|
|
Dimensions |
300 x 300 x 170 mm |
|
|
Mounting |
surface on the desk |
|
|
Customs tariff number |
85363030 |
|
|
EAN |
8595090553465 |
Dimensions:
AC diverter ,for suppression of AC voltage
Related Product
AC diverter ,for suppression of AC voltage
SPD for Cathodic Corrosion Protection System.Combines an AC current diverter and a SPD in one enclos..
Digital tester for status monitor of SPDs
Measurement of insulation resistance. It can be used to provide a more accurate imagine of the SPD s..
Automatic VLD class 2 tester
Portable automatic tester of VLD class 2.Fully automatic measurement.Measurement of Non-triggering v..
Voltage limiting device, VLD of class 2.2, type VLD-O+F
Voltage limiting device, VLD of class 2.2, type VLD-O+F, limiting of occurrence non-permissible touc..