BNC connectors

Protection for coaxial lines. Installation at the boundary of LPZ 0 and LPZ 1 zones at the line input into the

building. Suitable as the 1st level of surge protection in coordination with the SX type.

Parameters

Type of SPD		D1,C2
Location of SPD		ST 1
Maximum operating voltage	Uc	180 V DC
Nominal load current	IL	4,000 A
C2 nominal discharge current (8/20 µs) core-SH	In	10,00KA
C2 nominal discharge current (8/20 µs) SH-PE	In	10,00KA
D1 impulse discharge current (10/350 µs) core-SH	Iimp	2,50kA
D1 impulse discharge current (10/350 µs) core-PE	Iimp	2,50kA
C3 voltage protection level mode core-SH at 1 kV/µs	Up	600v
C3 voltage protection level mode SH-PE at 1 kV/µs	Up	600v
Wave impedance	Z	75Ω
Insertion attenuation		0,60 dB
SWR		1,2
Bandwidth - min	f	0,00MHZ
Bandwidth - max	f	2150,00MHz
Response time core-SH	ta	100ns
Response time SH-PE	ta	100ns
Connection (input - output)		BNC 50
Degree of protection		IP 20
Range of operating temperatures - min		-40 °C
Range of operating temperatures - max		-80 °C
According to standard		EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012
ETIM Class		EC001466