• CLSA-12

vCombination of coarse and fine protection of data and M&C lines. For LSA separating strips.

Technical specifications

Type of SPD

 

C3,C2

Connection (input - output) 

 

LSA disconnection rail

Accessories 

 

grounding rail

Location of SPD 

 

ST 2+3

Maximum operating voltage 

Un

11V AC

Maximum operating voltage 

Uc

16V DC

Nominal load current 

IL

0,500A

C2 nominal discharge current (8/20 µs) per core `

In

500kA

C2 total discharge current (8/20 µs) cores-PE 

ITotal

10,00kA

C2 voltage protection level mode core-PE at In

Up

400V

C3 voltage protection level mode core-core at 1 kV/µs 

Up

21V

C3 voltage protection level mode core-PE at 1 kV/µs 

Up

350V

Response time core-core 

ta

1ns

Response time core-PE 

ta

100ns

Serial resistance per core 

R

1,60Ω

Treshold frequency core-core 

f

2,50MHz

Degree of protection 

 

IP 20

Range of operating temperatures - min

 

-40 °C

Range of operating temperatures - max 

 

-70 °C

ETIM Class 

 

EC001625

Mounting 

 

LSA disconnection rail

According to standard

 

EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012

Write a review

Note: HTML is not translated!
Captcha

CLSA-12

0 reviews / Write a review

* Required fields



Related Product

Cable External Jellyfilled Screened Armoured 20Pr 0.5mm

Cable External Jellyfilled Screened Armoured 20Pr 0.5mm

Telephone Cable with cellular polyethylene insulation, jelly filled with petroleum jelly and a ..

AED 14.37

26U 19'' DYNAMIC W=800mm and D=800mm

26U 19'' DYNAMIC W=800mm and D=800mm

DYNAmic series Networking Enclosures, provide maximum optimizationresulted to an optimum performance..

AED 2,699.00

FO Connector SC Epoxy MM

FO Connector SC Epoxy MM

SC is one of the most common product for reliable networks and is therefor globally used. With ..

AED 12.02

Knürr Dacobas® 19” Cabinet Type B, Width 800 mm without front door, D 870 mm(stationery).

Knürr Dacobas® 19” Cabinet Type B, Width 800 mm without front door, D 870 mm(stationery).

Specification:With fixed 19“ mounting on the front and rear for DIN EN 60297-3 compliant component..