• Three-Phase Network Analyser - Class A

Main Specifications:

  •  Voltage input: 3 channels: 0-275/400 VRMS (400/690 V available as an option)
  •  HF voltage input: 3 channels
  •  Current input: 4 channels, 0-6 A RMS
  •  Analogue inputs: 4 (0-20 mA)
  •  Voltage accuracy: < 0.1 %
  •  Power supply: 85-264 Vac (47-63 Hz) / 110-375 Vdc
  •  Communication: RS232 / Current loop / Ethernet port (option)
  •  Dimensions (L x H x W) in mm: 160 x 240 x 40

Description:

The MAP 640 analyzer measures and records the following parameters of HV / MV / LV electrical networks:

  •  RMS voltage
  •  Direct, negative-phase-sequence and homopolar voltage
  •  Level of unbalance
  •  Current
  •  Power measurements (P, Q, S /PF, cos phi)
  •  Energy measurements (Ea, Er, Es)
  •  Frequency
  •  THD
  •  Harmonics up to the 50th order
  •  Interharmonics
  •  Lfl, Pst and Plt flicker 

Main functions:

  •  Voltage parameters: Min., Max. and average values
  •  Current parameters: Min., Max. and average values
  •  Voltage measurements (dips, outages, interruptions and overvoltages) 
  •  1/2-1 cycle RMS
  •  HF transients (peak detection, waveform recording): 2 MHz
  •  Waveform recording: up to 12.8 kHz, configurable
  •  Possibility of configurable pre/post-triggering
  •  Transients: 78.125 µsec.
  •  Configurable analysis templates (other than EN 50160)
  •  Clock synchronization: GPS / DCF (via external coupler)
  •  Measurement of signalling voltages < 3,000 Hz
  •  PQDIF data format: available as an option
  •  Memory backup (Flash): 128 MB
  •  Internal power reserve: 10 sec.

 Advantages

  • Complies with the EN 61000-4-30 Class A standard
  • 3 U / 4 I measurement inputs
  • Fast transients (2 MHz)
  • Analysis of the parameters according to EN 50160
  • Compact and easy to install in a cabinet

Write a review

Note: HTML is not translated!
Captcha

Three-Phase Network Analyser - Class A

* Required fields


Terms & Conditions
  • All prices are subject to confirmation and exclude applicable taxes unless stated otherwise.
  • Payment terms are outlined in the respective quotation or invoice.
  • Orders will be processed once payment is confirmed or an approved purchase order is received, where applicable.
  • Prices, availability, and payment terms are subject to change without prior notice.

Related Product

Trailer with drum for triple and single duct pipes

Trailer with drum for triple and single duct pipes

SpecificationPart Number<-->kgXARCTM10CA1800mm3150mm185XARCTM14CA2150mm3150mm200..

Desk with left office pedestal (W1140,H720, D870)CRS.

Desk with left office pedestal (W1140,H720, D870)CRS.

Specifications:Basic desk: With a lockable office pedestal, left.Drawer height, 3 x 150 mm.With 1 ..

FO Patch Cord 9/125 Dpx OS2 2.0mm E2000/UP-LC/UPC-10m LSOH.

FO Patch Cord 9/125 Dpx OS2 2.0mm E2000/UP-LC/UPC-10m LSOH.

Webb’s fibre optic patch cords are manufactured from high-quality optical fibre, terminated with st..

MM Optical Loss Test Set + VisiTester, T27603

MM Optical Loss Test Set + VisiTester, T27603

An Optical Loss Test Set used to test power, insertion loss, continuity and faults on multimode fib..