Fine protection for one port of Ethernet Cat. 6. Installation at the boundary of LPZ 2 and LPZ 3 zones directly
in front of the device. DL/Cat. 6-60V also for power supply.
Technical specifications
Type of SPD | C2,C3 | |
Location of SPD | ST 3 | |
Maximum operating voltage | Uc | 60V DC |
Nominal load current00A0 | IL | 0,500A |
C2 nominal discharge current (8/20 µs) per core | In | 0,20kA |
C2 total discharge current (8/20 µs) cores-PE | ITotal | 1,60kA |
C2 voltage protection level mode core-core at In | Up | 130V |
C2 voltage protection level mode core-PE at In | Up | 350V |
C3 voltage protection level mode core-core at 1 kV/µs | Up | 130V |
Response time core-core | ta | 1ns |
Insertion attenuation at 250 MHz | 200dB | |
Treshold frequency core-core | f | 55,00MHz |
Connection (input - output) | RJ 45/RJ 45 | |
Degree of protection | IP 20 | |
Range of operating temperatures - min | -40 °C | |
Range of operating temperatures - max | 80 °C | |
According to standard | N 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012 | |
ETIM Class | EC000943 |
DL-Cat.6 -60V
Related Product
Knürr Elicon® PC Pedestal
Bonded main unitWith passive ventilation from the rear at the topFull glass door and lock at the fro..
Duct calibrator with internal space for transmitter
SpecificationPart Numberø-ømm:<-->kgJZ-KAL03434-25210 mm0,4JZ-KAL04444-25210 mm0,4..
Cable pulling grips for electrical installations
strength 200 kg/mm2CablemmPart NumberLengthmmBreak StrengthmmNo point endsWiremmNo of wire..
Kevlar cable pulling grip with one reinforced pulling eyelet
SpecificationCablePart NumberLengthBreak streghtNo point endsWireNo of wiresmm mmkg&n..