DP-060-V/1-16

Protection of power supply with output from the midle and non-grounded pole. Installation as close as possible to the protected equipment.

Technical specifications

Type of SPD		T3, C2
Connection (input - output)		terminals-terminals
Location of SPD		ST 2
Nominal voltage	Un	60V AC
Maximum operating voltage	Uc	75V AC
Nominal load current	IL	16,000A
C2 nominal discharge current (8/20 µs) per core	In	2,00kA
C2 voltage protection level mode core-core at In	Up	390V
C2 voltage protection level mode core-PE at In	Up	210v
Test voltage L+ - L-		4,0kV
Test voltage L+(L-)-PE		4,0kV
voltage protection level L+ - L-		0,39 kV
voltage protection level L+(L-)-PE		0,21 kV
Maximum overcurrent protection		16 A gL/gG or B 16 A
Response time L+ - L-		25ns
Response time L+(L-)-PE		100ns
Cross-section of connected conductors solid (min)		0,14mm2
Cross-section of connected conductors solid (max)		4,00 mm2
Cross-section of connected conductors stranded (min)		0,14 mm2
Cross-section of connected conductors stranded (max)		2,50 mm2
Degree of protection		IP 20
Range of operating temperatures - min		-40 °C
Range of operating temperatures - max		-70 °C
Mounting		DIN rail 35 mm
According to standard		EN 61643-21+A1,A2:2013, EN IEC 61643-21+A1,A2:2012, EN 61643-11:2012, IEC 61643-11:2011