Tecoras Outdoor Cabinet 27U H1440 W770 D900 with HEX150 Heat Exchanger

Scope of supply:

·         Basic frame made of Aluminium extrusions

·         Perforated front door with swing handle for Euro half cylinder lock, 3-point-latch-system,

       door stop bracket 90°/130° and right hinged prepared for heat exchanger.

·         Closed rear door with swing handle for Euro half cylinder lock, 3-point-latch-system, door

       stop bracket 90°/130° and left hinged.

·         Double walled side panels.

·         Roof top 30mm high with access for hoisting eyebolts.

·         Internal top cover.

·         Internal bottom cover with cable inlet panels.

·         Installation frame with height 100mm with lateral access plates.

Accessories:

·         1 pair of 19” 27U high uprights front mounted incl. mounting provisions, max. installation depth 500mm

·         1 pair of 19” 22U high uprights rear mounted incl. mounting provisions

·         2 depth struts left and right hand side

·         1 power supply unit 230VAC/48VDC, 1000W to operate the heat exchanger, assembled at depth strut

        on right hand side

·         3 19” cable brackets, assembled at front side

·         1 19” blank panel, assembled at front side

·         2 pairs of chassis runners L470, assembled between 19” uprights front and rear

·         1 grounding set

·         1 hoisting eyebolt set

Heat management system:

·         Front door is equipped with heat exchanger with 150W/K specific cooling capacity consisting on

·         1 enclosure body with removable lid

·         1 counter-current heat exchanger core

·         4 centrifugal fans 48VDC

·         1 control board to control the fan speed depending on the temperature

·         Specific cooling capacity 150W/K which allows to dissipate about 1500W at 10K temperature difference

·         Power consumption of the four fans: max. 440W (48VDC)  

Main dimensions:

* Weight without any 3d party equipment

** Internal depth is reduced by 173mm in front of the heat exchanger at the door inside

Surfaces and colour codes:

• The basic frame of the enclosure is made of polished Aluminium.
• The internal metal provisions have paint-free surfaces.
• All external surfaces are pre-treated for powder coating.
• The surface for the external panels is powder coated with medium texture with colour codes RAL 7035.

Material List: