The OPTIMAL ROF rack is designed to cope with the demanding needs of IT equipment within a data center,
equipment room and network or telecommunications closet. ROF’s flexible configuration options mean that
it’s easy to tailor the solution to your exact requirements. Various height, depth and width options, along with
a load rating of up to 1000 kg, airflow optimization solutions and flexible cable management mean that it
has never been easier to custom configure a cabinet that meets your requirements.
CABINET CONFIGURATION DETAILS
Type | ROF |
Height | 48U |
Width | 800 mm |
Depth | 1000 mm |
Extrusions | L-type undivided extrusions |
Front Door | Vertically divided vented door (perforation rate 83%) * |
Front Door Lock | Swivel handle DIN profile, universal key, 333, multipoint |
Rear Door / Panel | Vertically divided vented door (perforation rate 83%) * |
Rear Door / Panel Lock | Swivel handle DIN profile, universal key, 333, multipoint |
Side Panels (Both Sides)* | side panels, sheet steel, universal key |
IP Rating | - |
Plates | - |
Load Rating | - |
Color | - |
* multipoint lock only, IP20 max.
Sizes
- Height: 48U
- Width: 800 mm
- Depth: 1000 mm
Construction
- Welded-frame design
- 1.5 & 2.0 mm sheet steel
Load rating
- Standard 300 kg (15‑33U), 400 kg (36U) and 500 kg (42‑48U) for 600, 800 and 1 000 mm deep racks
- 19" vertical extrusions
- 2 pairs of sliding 19" extrusions, adjustable from inside
IP rating
- Standard IP30
- Optionally IP54 (required for A/C unit installation) with multipoint lock only
- IP20 when perforated doors used
Colors
- Standard RAL 7035 and 9005
- Optionally other colors
Front door
- Tinted security glass door
- Swivel handle lock assembly – single or multipoint, optionally cylinder or combination lock (other locks on request)
- Door opening angle 180 Degree
- Easy re‑hanging to open on right or left
- Optionally steel, vented, perforated, glass with perforation, vertically divided door
Rear panel
- Removable with module for cable entry
- Can be replaced by multiple door options
Side panels
- Removable with locks
- Cable entries (300×100 mm)
- Top, bottom and rear plate
- 800 mm wide racks have additional cable entries in top and bottom plate
- All cable entries covered by removable blank panels
Ventilation unit openings
- Top, bottom plate
- All ventilation unit openings covered by removable blank panels
Feet
- Adjustable feet as standard; castors, lockable castors, plinth, or plinth with filter options Adaptation
- Possibility to adapt for installation of 21" equipment (on request only for 800 mm width)
- Adaptor DP‑RE‑01 needed (ordered separately)
Other
- Racks can be installed in blocks by using DP‑DR‑UNI (ordered separately)
- GND/earthing kit included
Cabinet 48U W800 D1000mm Front And Rear Supervented Door
Related Product
Mountpost 41U Miracel Server Steel (4/set)
For mounting trade standard 19” serversPlease order suitable assembly kit for rack widths 700 / 800P..
Dual Optical Loss Test Set + VisiTester, T27622
A Dual Optical Loss Test Set used to test power, loss, continuity and faults on single mode fiber o..
930XC-Handheld Singlemode OTDR
The OTDR is an easy to use, full-featured handheld test instrument that is capable of measuring the ..
Blank Plate 6U - RAL7035
For enclosing open-front areasMaterial/FinishSheet steel 1.5 mmPowder CoatedColourRAL 7035, lig..