The OPTIMAL ROF rack is designed to cope with the demanding needs of IT equipment within a data center,
equipment room and network or telecommunications closet. ROF’s flexible configuration options mean that
it’s easy to tailor the solution to your exact requirements. Various height, depth and width options, along with
a load rating of up to 1000 kg, airflow optimization solutions and flexible cable management mean that it
has never been easier to custom configure a cabinet that meets your requirements.
Cabinet Configuration Details
Type | ROF |
Height | 48U |
Width | 600 mm |
Depth | 1000 mm |
Extrusions | L-type undivided extrusions |
Front Door | Vented Door (perforation rate 83% |
Front Door Lock | Swivel handle DIN profile, universal key, 333, multipoint |
Rear Door / Panel | Vertically divided vented (perforation rate 83%) |
Rear Door / Panel Lock | Swivel handle DIN profile, universal key, 333, multipoint |
Side Panels (Both Sides)* | 2 side panels, sheet steel, universal key |
IP Rating | - |
Plates | Top & bottom plates – Integral |
Load Rating | - |
General Optimal ROF Cabinet Description
Sizes
- Height: 15, 18, 21, 24, 27, 33, 36, 42, 45, 48U
- Width: 600, 800 mm
- Depth: 600, 800, 1 000, 1 200 mm (only for 42U)
Construction
- Welded-frame design
- 1.5 & 2.0 mm sheet steel
Load rating
- Standard 300 kg (15‑33U), 400 kg (36U) and 500 kg (42‑48U) for 600, 800 and 1 000 mm deep racks
19" vertical extrusions
- 2 pairs of sliding 19" extrusions, adjustable from inside
IP rating
- Standard IP30
- Optionally IP54 (required for A/C unit installation) with multipoint lock only
- IP20 when perforated doors used
Colors
- Standard RAL 7035 and 9005
- Optionally other colors
Front door
- Tinted security glass door
- Swivel handle lock assembly – single or multipoint, optionally cylinder or combination lock (other locks on request)
- Door opening angle 180 Degree
- Easy re‑hanging to open on right or left
- Optionally steel, vented, perforated, glass with perforation, vertically divided door
Rear panel
- Removable with module for cable entry
- Can be replaced by multiple door options
Side panels
- Removable with locks Cable entries (300×100 mm)
- Top, bottom and rear plate
- 800 mm wide racks have additional cable entries in top and bottom plate
- All cable entries covered by removable blank panels
Ventilation unit openings
- Top, bottom plate
- All ventilation unit openings covered by removable blank panels
Feet
- Adjustable feet as standard; castors, lockable castors, plinth, or plinth with filter options Adaptation
- Possibility to adapt for installation of 21" equipment (on request only for 800 mm width)
- Adaptor DP‑RE‑01 needed (ordered separately)
Other
- Racks can be installed in blocks by using DP‑DR‑UNI (ordered separately)
- GND/earthing kit included
Cabinet 48U W600 D1000mm F/Supervented R/Ver.Div Door-9005
Related Product
Cable Guide Kit - 10pcs/pkt
For orderly cable routingDimensions:External 61 mm x 42.5 mmInternal 52 mm x 23 mmSupply schedule10 ..
Microscope Set 400x W/Handheld Monitor, Capture Card
The OFT-700 fiber end face inspector is designed for ferrule end face inspection with excellent ..
AED 4,925.00
Knürr Elicon Cable Router
Color combinationFinal digit of order number .1: Main unit: Light gray Door: Full glass do..
FO Panel 24xSC For FO Splice Box Wall Mount Double
Wall-Mount Fiber-Optic Splice BoxesWall-mount fiber-optic splice boxes are used for the termination ..
AED 19.20