• Triple Optical Laser Light Source, T28010-APC

This triple laser source is a general purpose test source for single mode systems with an APC connector, at 1310-1550-1625 nm. Typical applications include fiber optic attenuation measurement, polarity testing and fiber identification on critical systems.

  • Easy to use, rugged & versatile
  • Long battery life, micro USB power/charger
  • Interchangeable connectors with dust cap & tilt bail
  • Superior re-connection repeatability, < 0.1 dB
  • Excellent stability
  • Autotest & Multi-Fiber ID Tone generator
  • Full QA & test reports ISO/IEC 17025 traceable

Specifications:

Attribute Name

Attribute Value

Output wavelength

Port 1: 1310, 1550, 1625 nm Laser APC

Output power

-3 dBm ±1 dB (@ 9/125 µm)

Adjust output power

Adjustable over 7 dB in 0.01 dB steps

Short term stability (for 15 min, typical ±2 °C, after warm up, ORL < -25 dB)

0.04 dB (for 1310, 1550 nm) / 0.06 dB (for 1625 nm)

Stability over temperature

0.6 dB (typical)

Wavelength initial tolerance (@ 25 °C)

20 nm

Spectrum width (FWHM)

3 nm (typical)

Wavelength drift

0.4 nm per °C (typical)

Reconnection repeatability (95% confidence)

0.1 dB

Calibration validity (ISO/IEC 17025)

3 years

Modulated output

270 Hz, 1 kHz, 2 kHz ± 2 %, 12 Multi-Fiber ID tones

Autotest (not available for 470, 540 nm LED sources)

Compatible with KI Autotest power meter port & matching λ

Power

Battery / External power via USB

Battery types

2x AA (LR6) Alkaline / 2x AA NiMH AA (rechargeable via USB)

Battery life

Laser/LED source: 90/80 hours in Autotest, typical

Auto off

Selectable

Case

Polycarbonate (body) / rubber (edges & corners), moisture resistance, 1-meter drop tested

Size

190 mm x 105 mm x 35 mm

Unit weight

0.42 kg

Shipping weight

1.5 Kg

Operating / storage temperature

-15 to 55 °C / -25 to 70 °C

Relative humidity

0 ~ 95 %

Warranty

3 years

Products

Write a review

Note: HTML is not translated!
Captcha

Triple Optical Laser Light Source, T28010-APC

* Required fields


Terms & Conditions
  • Product Information: Specifications, images and availability are subject to change without notice.
  • Enquiries & Pricing: All enquiries and displayed prices are subject to availability and confirmation by Dafnia.
  • Quotation & Payment: Final pricing, applicable taxes, delivery and payment terms will be stated in the quotation or invoice.
  • Order Confirmation: Orders are confirmed only upon written acceptance by Dafnia and receipt of the agreed payment or approved purchase order, where applicable.

Related Product

Manual, hydraulic single speed crimping tool

Manual, hydraulic single speed crimping tool

Specificationø mm2KN<-->KG12050346x130 mm2,0..

Plinth Fixed W600 D1000 For Miracel - RAL7035

Plinth Fixed W600 D1000 For Miracel - RAL7035

StationaryCable entry possible from all sidesPanels front and rear with vent slots and installation ..

VOLTA ROD ACCESSORIES
Worktops, linear, D1200 lowered (W-1230).

Worktops, linear, D1200 lowered (W-1230).

Premium worktops made from quality 3-layer particle board with a durable HPL-coating. 30mm strong ..