- For guiding cables with cable binders and for universal mounting
- Holes for mounting cage nuts
- Distance between two multifunctional struts can be varied using the T-slot
- Installation on the basic rack extrusions or on the 19” extrusions, across and on the side
- Type A - for universal application
- Type B - specifically for mounting with cable binders, no threading required
Material
- Sheet steel, 1.5 mm
Finish
- Zinc passivated
Installation positions
- 1 on the basic rack in the depth 2 on the basic rack on the width 3 on the 19" extrusions on the width 4 on the 19” extrusions in the depth
Supply schedule
- 1 Multifunctional strut
Multifunction Member Type "B" D800
Related Product
Steel Duct brush on wooden kernal
Specificationø:<-->kg160mm330mm5,0..
Replacement module for BDG-230-V/2-(F)Rx
SPD - for data, signalling and telecommunications lines / I&C / Spare modulesReplacement module ..
-600x300-100x100.jpg "Flux Remover C For General Purpose Electronics Use, 10.5oz")
Flux Remover C For General Purpose Electronics Use, 10.5oz
Cleans no-clean and rosin fluxNonflammable and fast-dryingNon-corrosiveNo residue/no rinsingSafe on ..
Dual Optical Loss Test Set + VisiTester, T27622
A Dual Optical Loss Test Set used to test power, loss, continuity and faults on single mode fiber o..